Specifications

Coolant level, check
Do not open the filler cap when the engine is hot, except in an emergency. Boiling liquid or vapour may be
ejected.
Warning
The system must be filled up with liquid which has identical proportions to that already contained in the
cooling system
Important
 Check the coolant level daily, before starting the equipment.
 Top up if necessary.
 The coolant level should be approximately 5 cm below the edge of the filler cap seal.
Checking the air filter clogging indicator
Special air filters must be used for extremely dusty conditions.
Important
 The air filters must be replaced if the indicator remains in the red zone after the
engine is stopped.
 After the filters have been replaced, press the button to reinitialise the indicator.
34/209