Quick Coupling Products Catalog 3800 USA February 2005 The World Standard
Parker Quick Coupling Division Locations Minneapolis, Minnesota Grantsburg, Wisconsin Lincoln, Nebraska Chetek, Wisconsin FAILURE OR IMPROPER SELECTION OR IMPROPER USE OF THE PRODUCTS AND/OR SYSTEMS DESCRIBED HEREIN OR RELATED ITEMS CAN CAUSE DEATH, PERSONAL INJURY AND PROPERTY DAMAGE. This document and other information from Parker Hannifin Corporation, it's subsidiaries and authorized distributors provide product and/or system options for further investigation by users having technical expertise.
Hydraulic Quick Couplings ..........Section B Introduction .............................................................B-2 Coupling Selection Guide .......................................B-4 General Purpose.....................................................B-5 Non-Spill................................................................B-20 Connect-Under-Pressure ......................................B-35 High Pressure .......................................................B-44 Mold Coolant Line ............
A Pneumatics Pneumatic Quick Couplings A-1 Quick Coupling Division 8145 Lewis Road • Minneapolis, MN 55427 www.parker.
A Pneumatics Introduction Pneumatic Quick Couplings Single Shut-Off Couplings The standard seal material for all Parker Single Shut-Off couplers is Nitrile. Ethylene Propylene, Fluorocarbon, and Neoprene seals are available as options. See the comprehensive Fluid Compatibility Chart that provides guidelines for seal and body material selection. When there is need for further assistance in selecting the appropriate seal material, please consult factory.
30 Series ..................................................A-27 to A-30 Couplers ...............................................A-29 to A-30 Twist-Lock Couplings ............................................A-31 Couplers ............................................................A-32 Nipples...............................................................A-32 Introduction ..............................................................A-2 Coupling Selection & Ordering Guide...................
A Pneumatics Coupling Selection & Ordering Guide Pneumatic Quick Couplings Coupler Style Body Material* Interchange Size (in.) B SS S P Locking Mechanism Std. Seal** Material Std.
Popular Coupling Designs Parker’s Quick Coupling Division manufactures quick couplings to interchange with popular designs that have become accepted standards in the industry today. The actual 10 Series (Tru-Flate Interchange) size nipple chart below can be used to help select Parker Quick Couplings that will interchange with specific nipple designs and sizes.
A Pneumatics Industrial Interchange Nipples Pneumatic Quick Couplings Features • Parker Industrial Interchange nipples are for use with any Parker 20 Series, HF Series, 30 Series, Universal, HF or Ez-mate couplers. • Precision machined surfaces and hardened load-bearing areas** resist the effects of mechanical shock in the most rugged applications.
Standard Hose Barb D E G Body Size (in.) Part No. Brass Part No. Steel Part No. Type 303 Stainless Hose I.D. 1/4 1/4 1/4 1/4 3/8 3/8 1/2 1/2 1/2 3/4 3/4 3/4 – – – – – – – – – – BH5G – H8C – H8C-D H9C H5E H6E H4F H5F H5F-G H5G-F H5G H5G-J – SH8C – SH9C – – – – – – – – 1/4 1/4 5/16 3/8 3/8 1/2 3/8 1/2 3/4 1/2 3/4 1 Dimension (in.) Overall Exposed Largest Length Length* Diameter D 1.72 2.09 2.09 2.09 1.85 2.19 2.53 2.53 3.06 2.47 3.00 3.24 E 0.95 1.33 1.33 1.33 .090 1.24 1.29 1.29 1.82 1.31 1.
A Pneumatics General Purpose – Manual Connect Pneumatic Quick Couplings 10 Series, 20 Series, 50 Series, 70 Series 6 5 1 7 3 2 8 4 Component Part Features for Manual Couplers, Series 10, 20, 50 & 70 Series Accessories - Coupler Options Grip-Ring Sleeve - Features 1. Precision machining, hardened wear points* and solid barstock construction provide long life even in rugged applications. 2.
A Pneumatics General Purpose – Manual Connect Pneumatic Quick Couplings 10 Series How to Order Information The standard 1/4" 10 Series features a brass coupler with a steel valve. Larger sizes include an all steel construction with brass also available. To order a 3/8" or 1/2" coupler with a brass body and steel sleeve, add the prefix “B” to the steel part number, Example: B15.
A Pneumatics General Purpose – Manual Connect Pneumatic Quick Couplings 10 Series Couplers Female Pipe Thread A C B Body Size (in.) Part No. Brass Part No. Steel Thread Size NPTF 1/4 1/4 1/4 3/8 3/8 3/8 1/2 1/2 1/2 B13A B13 B13E – B15 – – B17 – – – – 15C 15 15F 17E 17 17G 1/8-27 1/4-18 3/8-18 1/4-18 3/8-18 1/2-14 3/8-18 1/2-14 3/4-14 Body Size (in.) Part No. Brass Part No.
A Pneumatics General Purpose – Manual Connect Pneumatic Quick Couplings 10 Series Nipples Female Pipe Thread D E G F Body Size (in.) Part No. Brass Part No. Steel Thread Size NPTF Overall Length 1/4 1/4 1/4 3/8 3/8 1/2 1/2 1/2 – B3C – – – – – – 1C 3C 3C-E 1E 3E 1F 3F H3F-G 1/8-27 1/4-18 3/8-18 1/4-18 3/8-18 3/8-18 1/2-14 3/4-14 D 1.28 1.47 1.50 1.60 1.68 2.05 2.27 2.38 Dimensions (in.) Exposed Hex Length* Size E 0.55 0.74 0.77 0.67 0.77 0.83 1.05 1.13 Largest Diameter Wt.
20 Series Industrial Interchange How to Order Information The standard 1/4" 20 Series is a brass coupler with a steel valve. The larger sizes are an all steel construction with brass available as an option. To order a 3/8" or 1/2" body size coupler with a brass body and a steel sleeve and valve, add the prefix “B” to the steel part number. Example: B16. Add the suffix “N” as well as the “B” prefix to order an all brass coupler with stainless steel locking balls and springs, Example: B25N.
20 Series Industrial Interchange Couplers Female Pipe Thread A C B Body Size (in.) Part No. Brass Part No. Steel Part No. Type 303 Stainless Thread Size NPTF 1/4 1/4 1/4 3/8 3/8 3/8 1/2 1/2 1/2 B23A B23 B23E – B25 – – B17 – – – – 25C 25 25F 17E 17 17G – S23 – – – – – – – 1/8-27 1/4-18 3/8-18 1/4-18 3/8-18 1/2-14 3/8-18 1/2-14 3/4-14 Body Size (in.) Part No. Brass Part No. Steel Part No.
50 Series Specifications Body Size (in.) 1/4 Rated Pressure (PSI) 300 Temperature Range (Std. seals)* -40° to +250° F. Locking Device 4 balls * See Coupling Selection and Ordering Guide for Optional Seals. See Coupling Repair Kits Table on introduction page to General Purpose - Manual Connect Couplers Performance 50 Series (1/4" size) 35 30 Features 25 • Parker 50 Series couplings are interchangeable with ARO’s 210 series couplings.
A Pneumatics General Purpose – Manual Connect Pneumatic Quick Couplings 50 Series Nipples Female Pipe Thread D E Body Size (in.) Part No. Steel Thread Size NPTF Overall Length 1/4 A3C 1/4-18 D 1.47 G Dimensions (in.) Exposed Hex Length* Size E 0.66 F 0.62 Largest Diameter Wt. (LB) P/Piece G 0.72 0.04 * This dimension represents portion of nipple that is exposed when nipple is inserted in a Parker 50 Series coupler. F Male Pipe Thread D E Body Size (in.) Part No.
70 Series Specifications Body Size (in.) 1/4 Rated Pressure (psi) 300 Temperature Range (Std. seals)* -40° to +250° F. Locking Device 4 balls * See Coupling Selection and Ordering Guide for Optional Seals.
RF, HF, HA, UC Series 3 4 7 1 2 6 5 8 Component Part Features 1. Precision machining, hardened wear points* and solid bar stock construction provide long life even in rugged applications. 5. Integral sleeve guard protects the sleeve and resists accidental disconnects by allowing the coupling to ride over obstructions without the sleeve being retracted. 2. Tubular valve with large flow passages delivers high flow with minimum pressure drop for efficient performance.
RF Series Description The Parker RF Series pneumatic couplings offer the quality and dependability customers have come to expect from Parker’s line of pneumatic quick couplings. The RF Series has been designed to increase the flow through and reduce the pressure drop over the coupling. The nipple design has up to 2-1/2 times larger flow area than standard industrial interchange nipples.
A Pneumatics General Purpose – Push-To-Connect Pneumatic Quick Couplings RF Series Couplers Female Pipe Thread A C B Body Size (in.) NEW Part No. OLD Part No. Thread Size NPSF 1/4 1/4 3/8 3/8 RF-251-4FP RF-251-6FP RF-371-6FP RF-371-8FP CRF02-4-4 CRF02-4-6 – – 1/4-18 3/8-18 3/8-18 1/2-14 Dimensions (in.) Overall Hex Largest Wt. (LB) Length Size Diameter P/Piece A 2.19 2.34 2.33 2.49 B 0.81 0.81 0.94 1.00 C 0.99 0.99 1.07 1.07 0.26 0.27 0.31 0.35 Male Pipe Thread Body Size (in.
A Pneumatics General Purpose – Push-To-Connect Pneumatic Quick Couplings RF Series Nipples Female Pipe Thread Body Size (in.) NEW Part No. 1/4 1/4 3/8 3/8 OLD Part No. Thread Dimensions (in.) Size Overall Exposed* Hex Largest Wt. (LB) NPTF Length Length Size Diameter P/Piece RF-254-4FP NRF02-4-4-S 1/4-18 RF-254-6FP NRF02-4-6-S 3/8-18 RF-374-6FP – 3/8-18 RF-374-8FP – 1/2-14 D 1.45 1.50 1.53 1.62 E 0.68 0.73 0.78 0.87 F 0.62 0.81 0.81 1.00 G 0.72 0.94 0.94 1.16 0.06 0.09 0.10 0.
HF Series Industrial Interchange Specifications Body Size (in.) 1/8 1/4 3/8 1/2 Rated Pressure (psi) 250 300 300 300 Temperature Range (Std. seals) -40° to +250°F Locking Device 5 balls 4 balls 6 balls 8 balls Vacuum Data (inches Hg) Disconnected (coupler only) Not Recommended Connected — 27.4 27.4 27.4 Performance HF Series (1/8" & 1/4" sizes) 40 35 30 Features Air Flow in SCFM 1/4" • Parker HF Series Pneumatic Quick Couplings offer an alternative to traditional industrial interchange couplers.
A Pneumatics General Purpose – Push-To-Connect Pneumatic Quick Couplings HF Series Industrial Interchange 1/8" Body Size Couplers Female Pipe Thread Body Size (in.) A New Part No. Brass 1/8 HF-121-2FP 1/8 HF-121-4FP C Old Part No. Brass Thread Size NPTF HF302F-2 HF302F-4 1/8-27 1/4-18 Dimensions (in.) Overall Hex Largest Wt. (LB) Length Size Diameter P/Piece A 1.42 1.81 B 0.55 0.67 C 0.63 0.63 0.06 0.10 B Male Pipe Thread A Body Size (in.) New Part No. Brass Old Part No.
HF Series Industrial Interchange 1/4" and 3/8" Body Size Couplers Female Pipe Thread A Body Size (in.) New Part No. Brass Old Part No. Brass Thread Size NPSF 1/4 1/4 3/8 3/8 3/8 1/2 HF-251-4FP HF-251-6FP HF-371-4FP HF-371-6FP HF-371-8FP HF-501-8FP HF304F-4 HF304F-6 HF306F-4 HF306F-6 HF306F-8 – 1/4-18 3/8-18 1/4-18 3/8-18 1/2-14 1/2-14 Body Size (in.) New Part No. Brass Old Part No.
A Pneumatics General Purpose – Push-To-Connect Pneumatic Quick Couplings HF Series Industrial Interchange Heavy Duty Couplers Female Pipe Thread A Body Size (in.) New Part No. Steel Old Part No. Steel Thread Size NPSF 1/4 1/4 3/8 3/8 3/8 HF-251-4FP-S HF-251-6FP-S HF-371-4FP-S HF-371-6FP-S HF-371-8FP-S HF404F-4 HF404F-6 HF406F-4 HF406F-6 HF406F-8 1/4-18 3/8-18 1/4-18 3/8-18 1/2-14 Body Size (in.) New Part No. Steel Old Part No.
A Pneumatics General Purpose – Push-To-Connect Pneumatic Quick Couplings HA Series Specifications Body Size (in.) Rated Pressure (psi) Temperature Range (Std. seals) Locking Device Vacuum Service 1/4 300 -40° to +250° F 4 balls Not Recommended Performance HA Series (1/4" size) 45 40 35 Air Flow in SCFM 1/4" Features 30 25 20 15 10 • Parker HA Series couplings are interchangeable with ARO's 210 series couplings. See Table of Contents. 5 • Push to Connect design for easy one hand operation.
UC Series Features • The 1/4" UC Series Coupler will accept the industrial interchange, [(MIL-C-4109F) and (ANSI/(NFPA) T3.20.141990)], 10 Series (Tru-Flate) and the 50 series (ARO 210) style nipples. • The coupler features automatic push-to-connect operation, high flow machined “window valve,” corrosion resistant solid brass construction and a sleeve guard which helps prevent accidental disconnects and protects the sleeve from damage.
Series Industrial Interchange 6 7 1 3 2 4 5 8 Component Part Features 1. Precision machining, hardened wear points* and solid bar stock construction provide long life even in rugged applications. 2. Tubular valve with large flow passages delivers high flow with minimum pressure drop for efficient performance. The tubular design provides 360° support for both the valve seal and the mating nipple for long service life. 3.
30 Series Industrial Interchange How to Order Information Available with Sleeve-Lok (See Coupler Options Section). To order, add the suffix “-SL” to part number, Example: B33-SL. Brass valves are available for extra corrosion resistance. To specify a brass valve, add the suffix “N” to the regular part number. Example: B33N. A brass valve should be used for corrosive applications where steel parts are not suitable. Consult the factory for specific recommendations.
30 Series Industrial Interchange Couplers Female Pipe Thread A C B Male Pipe Thread A C B Body Size (in.) Part No. Brass Thread Size NPTF Overall Length 1/4 1/4 1/4 3/8 3/8 3/8 1/2 1/2 1/2 3/4 3/4 3/4 B33A B33 B33E B35C B35 B35F B37E B37 1/8-27 1/4-18 3/8-18 1/4-18 3/8-18 1/2-14 3/8-18 1/2-14 A 1.96 1.96 2.03 2.26 2.33 2.57 2.76 3.00 B 0.75 0.75 0.81 0.88 0.88 1.00 1.00 1.00 C 1.20 1.20 1.20 1.39 1.39 1.39 1.52 1.52 0.30 0.28 0.30 0.42 0.42 0.46 0.56 0.
A Pneumatics General Purpose – Push-To-Connect Pneumatic Quick Couplings 30 Series Industrial Interchange Couplers Standard Hose Barb A C B Body Size (in.) Part No. Brass Hose I.D. Overall Length 1/4 1/4 1/4 3/8 3/8 1/2 1/2 3/4 3/4 B30-3B B30-4B B30-5B B34-5B B34-6B B36-6B B36-7B B38-7B B38-8B 1/4 5/16 3/8 3/8 1/2 1/2 3/4 3/4 1 A 2.62 2.62 2.62 2.85 2.85 3.33 3.86 3.69 3.93 Dimensions (in.) Hex Largest Size Diameter B 0.75 0.75 0.75 0.88 0.88 1.00 1.00 1.31 1.31 C 1.20 1.20 1.20 1.39 1.
A Pneumatics General Purpose – Push-To-Connect Pneumatic Quick Couplings Twist-Lock Specification Body Size (in.) Rated Pressure (PSI) Temperature Range (Nitrile seal) Locking Device Vacuum Service 1/4 300 1/2 300 -40° F to +250° F. CAM Not Recommended Performance Twist-Lock Series (1/4" size) 35 30 Features • Push-to-Connect design for easy one hand operation. • A variety of port configurations are available to meet specific needs.
A Pneumatics General Purpose – Push-To-Connect Pneumatic Quick Couplings Twist-Lock Couplers Female Thread A C B Male Thread Body Size (in.) NEW Part No. Steel OLD Part No. Steel Thread Size NPT Dimensions (in.) Overall Hex Largest Wt. (LB) Length Size Diameter P/Piece 1/4 1/2 1/2 1/2 TL-251-4FP TL-501-6FP TL-501-8FP TL-501-12FP 8052-0319 1095-0040 1461-0070 1462-0040 1/4-18 3/8-18 1/2-14 3/4-14 Body Size (in.) NEW Part No. Steel OLD Part No.
Special Purpose – Standard - Non Marring Tool-Mate Series Features • Standard style Tool-Mate couplers are lightweight, easy to operate, and non-marring with easy, push-to-connect action. • Couplers are constructed of Polyamide material; springs, balls, and pins are stainless steel; and locking fingers are made of polyacetate. • PBH Tool-Mate Series is built to the Industrial Interchange profile identifiable with a Yellow ring around the body.
A Pneumatics Special Purpose – Standard - Non Marring Pneumatic Quick Couplings Tool-Mate Series Industrial Interchange Female Pipe Thread Body Size (in.) Part No. Thread Size NPTF Overall Length 1/4-18 3/8-18 1/4-18 3/8-18 1/2-14 2.60 2.67 2.95 2.95 3.17 0.67 0.91 0.67 0.83 0.99 Thread Size NPTF Overall Length Hex Size A B 1/4-18 3/8-18 1/4-18 3/8-18 2.97 2.99 3.39 3.39 0.67 0.91 0.83 0.83 A A 1/4" 1/4" 3/8" 3/8" 3/8" C B Male Pipe Thread Body Size (in.
Tool-Mate Series Features • Exhaust style Tool-Mate couplers are lightweight, easy to operate, and non-marring with easy, push-to-connect action and one-handed disconnection. • Couplers are constructed of black Polyamide material; springs, balls, and pins are stainless steel in the PES series and 1/2" PBS series; and locking fingers in the PBS series are made of polyacetate. End ports are galvanized steel.
A Pneumatics Special Purpose – Exhaust - Non Marring Pneumatic Quick Couplings Tool-Mate Series Exhaust Industrial Interchange Female Pipe Thread Body Size (in.) Part No A C B Male Pipe Thread 1/4" 1/4" 3/8" 3/8" 1/2" 1/2" 1/2" Body Size (in.) PBS-251-4FP PBS-251-6FP PBS-371-6FP PBS-371-8FP PBS-501-6FP PBS-501-8FP PBS-501-12FP Part No. Thread Size NPTF Wt. (LB) P/Piece Overall Length Hex Size Largest Diameter A B C 1/4-18 3/8-18 3/8-18 1/2-14 3/8-18 1/2-14 3/4-14 2.60 2.67 2.95 3.
E-z-mate Series Industrial Interchange Features • Parker's E-z-mate is an exhaust type coupler that is designed to exhaust air pressure prior to the disconnection process. • The valve sleeve acts as an integral shut-off valve that allows connection and disconnection at zero pressure. When the sleeve is moved to shut off air flow, it automatically vents downstream allowing for disconnection at zero pressure and eliminating the risk of “hose whip.
Couplers Female Pipe Thread OFF A ON C E-z-mate Series Industrial Interchange Body Size (in.) New Part No. Steel Old Part No. Steel Thread Size NPTF 1/4 1/4 3/8 3/8 1/2 1/2 3/4 3/4 EZ-251-4FP EZ-251-6FP EZ-371-6FP EZ-371-8FP EZ-501-8FP EZ-501-12FP EZ-751-12FP EZ-751-16FP EZ304F-4T EZ304F-6T EZ306F-6T EZ306F-8T EZ308F-8T EZ308F-12T EZ312F-12T EZ312F-16T 1/4-18 3/8-18 3/8-18 1/2-14 1/2-14 3/4-14 3/4-14 1-11 1/2 Body Size (in.) New Part No. Steel Part No.
A Pneumatics Special Purpose – Breathing Air Pneumatic Quick Couplings CJ Series Specifications Body Size (in.) 1/4 Rated Pressure (PSI) 150 Temperature Range (Std. Seals) -40° to +250° F. Locking Device 4 balls Vacuum Service Not Recommended Performance CJ Series (1/4" size) 50 45 40 • Parker CJ series couplings feature a unique design that allows for simple push-to connect operation yet requires a two step process to disconnect.
Special Purpose – Breathing Air Pneumatic Quick Couplings CJ Series Couplers Female Pipe A Body Size (in.) B New Part No. Brass Part No. Brass Thread Dimensions (in.) Size Overall Hex Largest Wt. (LB) NPSF Length Size Diameter P/Piece C 1/4 1/4 CJ-251-4FP CJ304F-4 1/4-18 CJ-251-6FP CJ304F-6 3/8-18 A 2.40 2.55 B 0.81 0.81 C 0.99 0.99 0.28 0.30 Male Pipe A Body Size (in.) B New Part No. Brass Old Part No. Brass Thread Dimensions (in.) Size Overall Hex Largest Wt.
Hose Fittings Male Reusable Hose End Part No. Brass Hose I.D. HOSE O.D. Thread Size NPTF Overall Length Hex Size Hex Size Largest Diameter Wt. (LB) P/Piece 330-C3 330-C5 330-C6 332-E6 332-E7 332-E8 332-E10 1/4 1/4 1/4 3/8 3/8 3/8 3/8 1/2 9/16 5/8 5/8 21/32 11/16 3/4 1/4 1/4 1/4 1/4 1/4 1/4 1/4 A 1.720 1.720 1.720 2.095 2.095 2.095 2.095 B 0.56 0.56 0.56 0.56 0.56 0.56 0.56 C 0.69 0.75 0.81 0.88 0.88 0.88 0.94 D 0.79 0.87 0.94 1.01 1.01 1.01 1.
A Pneumatics Accessories Pneumatic Quick Couplings Blow Guns (Controlled Pressure) Features • Parker Controlled Pressure Blow Guns meet OSHA requirements (section 29 CFR 1910.242 paragraph b), and directive #100-1. “Compressed air shall not be used for cleaning purposes except where reduced to less than 30 psi, and then only with effective chip guarding and personal protective equipment.
BG Series Description Made from impact resistant plastic, BG Series blow guns are durable and versatile. Extended nozzles allow air to be directed where it is required. The pistol grip trigger allows greater control over the amount of air delivered. Combined, these two features provide superior performance in a light weight, ergonomically designed package. Nozzles are available in short and extended versions and most models meet OSHA directives on the use of compressed air for cleaning purposes.
A Pneumatics Accessories Pneumatic Quick Couplings Two-Way Valves Features • Parker two-way valves are designed for use in air or liquid service. Description P410B – Two way valve with forward positioned lever handle. Inlet and outlet ports are 1/4" NPT. • Bodies are constructed of black molded polypropylene. • The valve cartridge components are machined from brass and stainless steel for corrosion resistance and long life. • Nitrile stem seals are standard. Add suffix Y for optional fluorocarbon seal.
B-1 Quick Coupling Division 8145 Lewis Road • Minneapolis, MN 55427 www.parker.
Introduction Hydraulic Quick Couplings B Hydraulics Double Shut-Off and Straight-Thru Couplings off valves. These valves open automatically when the body and nipple are connected, and close automatically when the two halves are disconnected—keeping fluid loss to a minimum. Parker hydraulic couplings have a wide variety of designs, each tailored to a particular application or use. This catalog is arranged according to those categories.
Table of Contents FH Series.........................................................B-31-32 Couplers..............................................................B-32 Nipples ................................................................B-32 FS Series .........................................................B-33-34 Couplers..............................................................B-34 Nipples ................................................................B-34 Repair Kits.............................
Coupling Selection & Ordering Guide Hydraulic Quick Couplings B Hydraulics Valving Body Size Material* Locking Br S S3 S6 Mechanism General Purpose 60 Series Poppet 1/8 - 2 1/2" ● ● ● ● 60 Series Steam Poppet 1/4 to 1" ● 6600 Series Poppet 1/4 to 1" ● SM Series Poppet 1/4 to 3/4" ● HP Series Poppet 1 to 1 1/2" ● 4000 Series Poppet/Ball 1/4 to 1" ● 4200 Series Poppet/Ball 3/8 to 1/2" ● Non-Spill NS Series Flush Face 3/8 to 1" ● Adapter Flush Face/Poppet 1/2" ● FF Series Flush Face 1/4 to 1" ● FE Series
General Purpose Couplings Hydraulic Quick Couplings 60 Series Special Order Information Standard seal material is Nitrile; optional seal materials are available. For 316 stainless steel products, standard seal material is Fluorocarbon, and other seal materials are available upon request. See Fluid Compatibility Chart at end of this catalog. All sizes of 60 Series can be furnished with locking sleeves. Place suffix letters “-SL” (Sleeve-Lok) after regular catalog numbers. Example H3-62-SL.
General Purpose Couplings Hydraulic Quick Couplings 60 Series B Hydraulics 4 2 4. Hardened nipples and sleeves (steel) and solid barstock construction make for a quality coupling with maximum resistance to damage from hydraulic and mechanical shock. 6 5. The seal is designed to withstand high pressures and provide reliable sealing. A wide selection of optional seal materials are available, see Fluid Compatibility Chart at end of this catalog for selection assistance.
General Purpose Couplings Hydraulic Quick Couplings 60 Series Couplers A Female Thread B Body Size (in.) Part No. Brass Wt. (LB.) P/Piece Part No. Steel Wt. (LB.) P/Piece Part No. Type 303 Stainless Wt. (LB.) P/Piece Part No. Type 316 Stainless Wt. (LB.) P/Piece Thread Size NPTF Thread Size ORB 1/8 1/8 1/4 1/4 3/8 3/8 1/2 1/2 3/4 3/4 1 1 BH1-60 – BH2-60 – BH3-60 – BH4-60 – BH6-60 – BH8-60 – 0.16 – 0.32 – 0.43 – 0.
General Purpose Couplings Hydraulic Quick Couplings 60 Series A Couplers Female Thread C B Hydraulics B Body Size (in.) Part No. Brass 1 1/2 1 1/2 1 1/2 1 1/2 2 1/2 2 1/2 2 1/2 BH12-60L BH12-60N – – BH2016-60 BH2020-60 BH2024-60 Wt. (LB.) P/Piece Part No. Steel Wt. (LB.) P/Piece Part No. Type 303 Stainless 4.58 H12-62L 4.70 SH12-62L 4.58 H12-62N 4.70 SH12-62N 4.61 H12-62-T20 4.72 SH12-62-T20 4.61 H12-62-T24 4.72 SH12-62-T24 11.06 H2016-62 10.58 SH2016-62 11.42 H2020-62 10.
General Purpose Couplings Hydraulic Quick Couplings 60 Series Steam Couplings Body Size (in.) Standard Seal Material Temperature Range 1/4 to 1 Ethylene Propylene up to +400° Coupler Female Pipe Thread Body Size (in.) Part No. Brass Thread Size NPTF Dimension (in.) Overall Wrench Largest Length Flats Diameter A B C 1/4 BH2-60-STM 1/4-18 2.26 0.81 1.14 3/8* H3-68 3/8-18 2.50 0.88 1.77 1/2 BH4-60-STM 1/2-14 2.87 1.12 1.77 3/4 BH6-60-STM 3/4-14 3.56 1.31 2.14 1 BH8-60-STM 1-11 1/2 4.18 1.62 2.
General Purpose Couplings Hydraulic Quick Couplings 6600 Series Performance 6600 Series (1/4") Test Fluid: Oil - 150 SUS B Hydraulics 25 Pressure Drop in PSID 20 15 1/4" 10 5 Features 0 • Poppet valves are mated with a solid metal perch that maintains valve alignment and prevents flow checking. 0 0.2 0.4 0.6 0.8 1 1.2 Flow in USGPM • Both the coupler's sleeve and the nipple's body are hardened to make the 6600 Series couplings resistant to damage from brinelling and mechanical shock.
General Purpose Couplings Hydraulic Quick Couplings Female Thread A C B Nipples Female Thread D E G F Body Size (in.) Part No. Steel Thread Size NPTF Thread Size ORB 1/4 1/4 3/8 3/8 1/2 1/2 1/2 1/2 1/2 3/4 3/4 1 1 6601-2-4 6601-4-4 6601-6-6 6608-6-6 6601-8-10 6601-12-10 6608-8-10 6608-10-10 6608-12-10 6601-12-12 6608-12-12 6601-16-16 6608-16-16 1/8-27 1/4-18 3/8-18 — 1/2-14 3/4-14 — — — 3/4-14 — 1-11 1/2 — — — — 9/16-18 — — 3/4-16 7/8-14 1 1/16-12 — 1 1/16-12 — 1 5/16-12 Dimensions (in.
General Purpose Couplings Hydraulic Quick Couplings SM Series Features The SM Series couplings feature: B Hydraulics • Poppet valves with captive valve seals: the valve seal is positively captured by the metal poppet to minimize seal washout. • Coupler and nipple are precision machined from solid barstock. • SM Series are available in female pipe (NPTF), SAE O-Ring Boss and British Pipe (BSPP) as standard. Applications SM Series couplings are used across the spectrum of hydraulic applications.
General Purpose Couplings Hydraulic Quick Couplings Female Thread C B A Nipples Female Thread G F E D Body Size (in.) Part No.
General Purpose Couplings Hydraulic Quick Couplings HP Series (High Pressure Coupling) Features • Operating pressures up to 5,000 PSI (350 Bar). B Hydraulics • Soft seat valving prevents leakage when coupler and nipple are disconnected. • Made of Carbon Steel. Exterior zinc plated with yellow chromate finish for corrosion resistance. • Smooth Flow Path Minimizes Pressure Drop. • Nitrile Body Seal supported by PTFE washer. Backup washer keeps seal from extruding at high pressures.
General Purpose Couplings Hydraulic Quick Couplings HP Series (High Pressure Coupling) A Body Size (in.) Part No. Thread Size Overall Length Wrench Flats Largest Diameter Wt. (LB.) P/Piec 1 1 1 1/2 1 1/2 HP-1001-16FP HP-1001-16FO HP-1501-24FP HP-1501-24FO 1 -11 1/2 NPSF 1 5/16 -12 ORB 1 1/2-11 1/2 NPTF 1 7/8 -12 ORB A 3.95 4.35 4.93 4.93 B 1.62 1.62 2.25 2.25 C 2.38 2.38 3.00 3.00 2.10 2.10 4.40 4.40 C B Nipples D Body Size (in.) Part No.
General Purpose Couplings Hydraulic Quick Couplings 4000 Series Features B Hydraulics Parker 4000 Series couplings feature: • Poppet valves available to prevent uncoupled leakage. • Ball valves available for rugged dependability in heavyduty hydraulic applications, within rated working pressures. • Critical parts are induction hardened for durability. • Dependable ball-locking mechanism holds the mating halves together. • Couplers and nipple are precision machined from solid bar stock.
General Purpose Couplings Hydraulic Quick Couplings Female Thread A C B Body Size (in.) Part No.
General Purpose Couplings Hydraulic Quick Couplings 4200 Series Features Parker 4200 Series couplings feature: B Hydraulics • Double acting sleeve for one handed push-to-connect operation when coupler is clamp or bulkhead mounted. • Poppet valves available to prevent uncoupled leakage. • Ball valves available for rugged dependability in heavy-duty hydraulic applications, within rated working pressures. • Critical parts are induction hardened for durability.
General Purpose Couplings Hydraulic Quick Couplings 4200 Series Couplers A Body Size (in.) Part No. Steel* Thread Size NPTF Thread Size ORB Overall Length 3/8 1/2 1/2 1/2 1/2 4250-3P 4250-4 4250-4P 4250-15 4250-15P 3/8-18 1/2-14 1/2-14 – – – – – 3/4-16 3/4-16 A 2.31 2.68 2.68 2.68 2.68 Dimensions (in.) Wrench Largest Flats Diameter B 0.81 0.94 0.94 0.94 0.94 C 1.31 1.50 1.50 1.50 1.50 Wt. (LB.) P/Piece 0.39 0.55 0.55 0.55 0.
Non-Spill Couplings Hydraulic Quick Couplings NS Series 5 8 7 B Hydraulics 6 4 2 3 1 Applications Features Non-Spill couplings by Parker are widely used in the public utility market where hydraulic oil spillage can constitute a serious safety hazard, particularly in overhead bucket hoists that are used for maintenance of high-voltage power transmission lines. These couplings are also used for quick change of hydraulic hand tools in the construction, railway maintenance and mining industries.
Non-Spill Couplings Hydraulic Quick Couplings Body Size (in.) C B A Nipples G F E D Part No. Steel Thread Size Overall Length Dimensions (in.) Hex Largest Size Diameter A B C 3/8 NS-371-6FP 3/8-18 NPSF 2.10 1.06 1.13 3/8 NS-371-6FB G3/8 BSPP 2.10 1.06 1.13 3/8 NS-371-8FO 3/4-16UNF 2.20 1.06 1.13 1/2 NS-501-8FP 1/2-14 NPSF 2.88 1.25 1.56 1/2 NS-501-8FB G1/2 BSPP 2.95 1.25 1.56 1/2 NS-501-10FO* 7/8-14UNF 2.97 1.25 1.56 3/4 NS-751-12FP 3/4-14 NPSF 3.19 1.56 1.96 3/4 NS-751-12FB G3/4 BSPP 3.38 1.
Non-Spill Adapters Hydraulic Quick Couplings How To Order Parker Non-Spill Adapters were designed due to the widespread use of several coupling types in the construction market. These adapters help the user adapt between poppet style couplings and non-spill type couplings. Adapters are widely available with Parker FE and FF Series to Parker 6600 Series coupling connections. This product is especially useful where multiple hydraulic attachments are being used with skid steer loaders.
Non-Spill Couplings Hydraulic Quick Couplings FF Series 1 2 3 B Hydraulics 4 5 7 8 6 Applications Features Parker FF Series couplings are widely used in the public utility market where hydraulic oil spillage can constitute a serious safety hazard, particularly in overhead bucket hoists that are used for maintenance of high-voltage power transmission lines. These couplings are also used for quick change of hydraulic tools in construction, railway maintenance and mining industries.
Non-Spill Couplings Hydraulic Quick Couplings B Hydraulics Couplers C B A Nipples G F E D FF Series Body Size (in.) Part No. Steel Thread Size Overall Length Dimensions (in.) Hex Largest Size Diameter 1/4 1/4 1/4 3/8 3/8 3/8 3/8 3/8 1/2 1/2 FF-251-4FP FF-251-4MP FF-251-6FO FF-371-6FP FF-371-8FP FF-371-6FB FF-371-8FB FF-371-8FO FF-501-8FP FF-501-10FO 1/4-18 NPSF 1/4-18 NPTF 9/16-18 UNF 3/8-18 NPSF 1/2-14 NPSF G3/8 BSPP G1/2 BSPP 3/4-16 UNF 1/2-14 NPSF 7/8-14 UNF A 1.79 1.84 1.91 2.39 2.80 2.
Non-Spill Couplings Hydraulic Quick Couplings FE Series Features • Sealed spring cavity prevents dust collection and possible sleeve binding. B Hydraulics • Heat treated valve sleeve and poppet resist scratches and wear. • Crimped valve seal prevents seal washout. • Hardened locking collar sleeve resists brinelling, avoids cracking and provides longer life. • Large number of locking balls resists brinelling. • Concealed lock ring prevents accidental removal.
Non-Spill Couplings Hydraulic Quick Couplings FE Series B Hydraulics Couplers Body Size (in.) Part No. Steel Thread Size Overall Length 1/2" 1/2" 5/8" FE-501-8FP* FE-501-12FO* FE-621-12FO* 1/2-14 NPSF 1-1/16-12 UNF 1-1/16-12 UNF A 2.65 3.10 3.67 Dimensions (in.) Hex Largest Size Diameter B 1.38 1.38 1.62 C 1.58 1.58 1.74 Wt. (LB.) P/Piece 0.85 0.90 1.51 * Non Sleeve Lock available – add “–NL” to part number C B A Nipples G Body Size (in.) Part No.
Non-Spill Couplings FEM Series FEM Series Applications B Hydraulics Parker FEM Series couplings are designed to meet the stringent design and pressure requirements of ISO 16028. The FEM modular design also facilitates wider variations in fitting options. Parker FEM couplers are designed for use in the construction, utility and agricultural equipment markets.
Non-Spill Couplings FEM Series FEM Series B Hydraulics Couplers C B A Nipples G F E D Body Size (in.) Part Number 1/4 3/8 3/8 1/2 1/2 1/2 1/2 1/2 5/8 3/4 3/4 1 1 FEM-251-4FP-NL FEM-371-6FP-NL FEM-371-8FO-NL FEM-501-8FP-NL FEM-501-10BMS-NL FEM-501-10BMF-NL FEM-501-10FO-NL FEM-501-12FO-NL FEM-621-12FO-NL FEM-751-12FP-NL FEM-751-12FO-NL FEM-1001-16FP-NL FEM-1001-16FO-NL Body Size (in.
Non-Spill Couplings Hydraulic Quick Couplings FC Series (Connect-Under-Pressure) Parker FC Series nipple provides connect-under-pressure capability with up to 3000 PSI of trapped pressure in the nipple and are ideal for applications where residual pressure makes reconnect difficult. Utilized primarily in the construction equipment market, FC Series products are commonly found on hydraulic attachments used in skid steer applications. The FC Series mates with the FF Series Parker interface.
Non-Spill Couplings Hydraulic Quick Couplings FEC Series (Connect-Under-Pressure) Applications B Hydraulics Parker FEC Series nipple provide connect-under-pressure capability with up to 3000 PSI of trapped pressure in the nipple and are ideal for applications where residual pressure makes reconnect difficult. Utilized primarily in the construction equipment market, FEC Series products are commonly found on hydraulic attachments used in skid steer applications.
Non-Spill Couplings Hydraulic Quick Couplings FH Series Features • 10,000 PSI operating pressure (700 bar). • Sleeve on coupler and nipple body have a RED finish for identification purposes. • Simple Push-To-Connect operation. • Sleeve-Lock to prevent accidental disconnect. • Non interchangeable with low pressure flush face couplings. • Meets performance and dimensional specifications of HTMA requirements, 10,000 PSI (700 bar). • Anti Blow-Out Nitrile/PTFE bonded nipple seal.
Non-Spill Couplings Hydraulic Quick Couplings FH Series Couplers B Hydraulics Body Size (in.) Part No. Steel 3/8 FH-371-6FP 3/8 FH-371-6MP 3/8 FH-371-6FB Wrench Flats Dimensions (in.) Largest Wt. (LB.) Diameter P/Piece Thread Size Overall Length A B C 3/8 -18 NPTF 3/8 -18 NPTF G3/8 -BSPP 2.63 2.85 2.55 1.12 1.12 1.12 1.23 1.23 1.23 Thread Size Overall Length Wrench Flats D E F 0.44 0.45 0.45 C B A Nipples Body Size (in.) Part No. Steel Dimensions (in.) Largest Wt. (LB.
Non-Spill Couplings Hydraulic Quick Couplings FS Series Features Applications Parker FS Series couplings virtually eliminate fluid loss upon disconnection, and minimize air inclusion during connections. They are ideal for use where spillage may cause undesirable conditions or constitute a safety hazard. The FS Series couplings have double shut-off flush mating valves that are suitable for sealing off media in chemical processing, chemical dispensing, food processing, and other corrosive applications.
Non-Spill Couplings Hydraulic Quick Couplings FS Series Couplers B Hydraulics Female Pipe Thread A B C Nipples Female Pipe Thread E G F D Body Size (in.) Part No. Thread Size Overall Length Hex Size Largest Diameter Wt. (LB.
Connect Under Pressure Couplings Hydraulic Quick Couplings 6100 Series Parker’s 6100 Series, is a thread-to-connect low spill coupling that can be used in a wide range of industrial applications where connected under pressure is required. The 6100 is ideal for connecting hydraulic lines on oil field equipment like power tongs, swivels and mobile drilling rigs. It is also widely used on dump trailers to connect the tractor to wet-line hydraulic systems.
Connect Under Pressure Couplings Hydraulic Quick Couplings 6100 Series Features 2 4 B Hydraulics 1 3 1. The connection indicator, a Parker innovation, serves as a visual check for complete connection of the 6100 coupling. It helps prevent premature failures and leaks. It assures that the connection is complete and the valves fully open, eliminating unnecessary flow restriction. (see drawing on next page) 2.
Connect Under Pressure Couplings Hydraulic Quick Couplings 6100 Series Couplers A C B Body Size (in.) Part No. Brass Thread Size NPTF Overall Length Dimensions (in.) Wrench Wing Flats Nut 3/4 3/4 1 1 1/4 1 1/2 6125-08 6125-12 6125-16 6125-20 6125-24 1/2-14 3/4-14 1-11 1/2 1 1/4-11 1/2 1 1/2-11 1/2 A 3.22 3.22 3.87 4.16 4.34 Body Size (in.) Part No. Brass Thread Size NPTF Overall Length 3/4 3/4 1 6135-08 6135-12 6135-16 1/2-14 3/4-14 1-11 1/2 A 3.22 3.22 3.87 B 1.16 1.16 1.43 C 1.
Connect Under Pressure Couplings Hydraulic Quick Couplings 8200 Series Features Parker 8200 Series couplings feature: B Hydraulics • Unique valve design permits connection while either or both the coupler and nipple are under pressure. • Double acting sleeve for one handed push-to-connect operation when coupler is clamp or bulkhead mounted. • Critical parts are hardened for durability. • Dependable ball locking mechanism holds the mating halves together.
Connect Under Pressure Couplings Hydraulic Quick Couplings 8200 Series Couplers Body Size (in.) Part No. Steel Thread Size NPSF Thread Size ORB Overall Length 1/2 1/2 1/2 8250-4 8250-15 8250-16 1/2-14 – – – 3/4-16 7/8-14 A 3.29 3.29 3.29 Dimensions (in.) Wrench Largest Flats Diameter B 0.87 0.87 0.87 C 1.50 1.50 1.50 Wt. (LB.) P/Piece 0.63 0.63 0.63 A C B Nipples Female Thread D E G Body Size (in.) Part No.
Connect Under Pressure Couplings Hydraulic Quick Couplings 9200 Series 7 6 B Hydraulics 2 8 4 1 3 Applications The Parker 9200 lever coupling is designed with a leveroperated cam that opens and closes the valves in both coupling halves, positively locking them into place. This allows the couplings to be easily connected and disconnected while under pressure. The 9200 couplings can functionally replace a Double Shut-Off quick coupling and two high pressure ball valves.
Connect Under Pressure Couplings Hydraulic Quick Couplings 9200 Series A Body Size (in.) Part No. Steel Thread Size NPTF Dimensions (in.) ORB Overall Length Wrench Flats Largest Diameter Wt. (LB.) P/Piece 1/2 1/2 1/2 1/2 *1/2 9250-4-320 9250-6-320 9250-15-320 9250-16-320 9250-334 1/2-14 – – – – – 9/16-18 3/4-16 7/8-14 9/16-18 A 5.37 5.37 5.37 5.37 5.37 B 1.13 1.13 1.13 1.13 1.13 C 1.50 1.50 1.50 1.50 1.50 2.02 2.04 2.06 1.98 2.15 * Mates with the 1/4" 60 Series Nipples.
Connect Under Pressure Couplings Hydraulic Quick Couplings 5000 Series Features The Parker 5000 Series coupling features: B Hydraulics • Two-piece coupler body that permits operation while one or both halves are under pressure as well as when there is no pressure in either half. • Connect under pressure by unscrewing the valve body until two or three threads are visible. • Nipple can be inserted and locked into the coupler without opening either valve.
Connect Under Pressure Couplings Hydraulic Quick Couplings 5000 Series Body Size (in.) Part No. Steel Thread Size NPTF Overall Length 1/2 5050-4 1/2-14 A 2.88 Dimensions (in.) Wrench Wrench Length Flats Flats B 2.32 C 1.06 Largest Diameter Wt. (LB.) P/Piece E 1.52 2.58 D 1.25 E C D B A Nipple D E Body Size (in.) Part No. Steel 1/2 1/2 1/2 8010-4 8010-15 8010-16 Thread Dimensions (in.
High Pressure Couplings Hydraulic Quick Couplings 3000 Series 1 1 B Hydraulics 2 3 5 4 6 Applications Features Parker 3000 Series couplings with their threaded union locking system and precision ball-type check valves, are designed for extreme high pressure applications such as found on portable hydraulic rams. See pages noted in Table of Contents for dust plugs and caps for the Parker full line of hydraulic couplings. 1. Machined from solid steel barstock for durability. 2.
High Pressure Couplings Hydraulic Quick Couplings 3000 Series Body Size (in.) Part No. Thread Size NPTF Overall Length 1/4 3/8 3/8 3050-2 3050-3 3050-3-231 1/4-18 (Male) 3/8-18 (Male) 3/8-18 (Female) A 2.38 2.88 2.82 Body Size (in.) Part No. Steel Thread Size NPTF Overall Length 1/4 3/8 3/8 3010-2 3010-3 3010-3-230 1/4-18 (Female) 3/8-18(Female) 3/8-18 (Male) D 1.29 1.58 2.31 Dimensions (in.) Wrench Largest Flats Diameter B 0.81 1.00 1.00 C 1.13 1.38 1.38 Wt. (LB.) P/Piece 0.25 0.49 0.
High Pressure Couplings TC Series Hydraulic Quick Couplings Features • Positive valve stop. The perch maintains valve alignment and provides metal to metal valve stop to insure that the valves open full–every time. B Hydraulics • Precision machined valves with elastomeric seals provide for positive shut-off upon disconnection. • Hardened nipples and sleeves and solid barstock construction make for a quality coupling with maximum resistance to damage from hydraulic and mechanical shock.
High Pressure Couplings Hydraulic Quick Couplings 1141 Series Coupler Part No. Thread Size NPTF 1/4 1141-62 1/4-18 Dimensions (in.) A 2.75 Wt. (LB.) P/Piece B 1.00 0.40 A B Applications The 1141 Series is a general purpose coupling for high pressure connect-under-pressure applications. Nipple Features • 303 Stainless steel body. • Brass locking sleeve Body Size (in.) Part No. Thread Size NPTF 1/4 1141-63 1/4-18 Dimensions (in.) C 2.00 Wt. (LB.) P/Piece D .88 0.
Mold Coolant Line Couplings Hydraulic Quick Couplings Moldmate Series Applications B Hydraulics Parker moldmate couplings are specifically designed for connecting coolant lines to molds and dies, on injection molding machinery in the plastics and die casting industries. Moldmate couplings significantly reduce machine downtime by providing fast and easy connection of coolant lines during mold changes. Their short nipples can be recessed below the surface of the mold for more efficient storage of molds.
Mold Coolant Line Couplings Hydraulic Quick Couplings Moldmate Series 1. Available with or without valves in the coupler. Non-valved couplers have minimum flow resistance for maximum cooling. Valved couplers shut off automatically upon disconnect. Valved couplers can be used with either valved or non-valved nipples. A valved nipple, however, must be used with a valved coupler. 4 2.
Mold Coolant Line Couplings Hydraulic Quick Couplings 90 Degree Moldmate Series B Hydraulics Body Part No. Size Brass (in.) Non-valved A C B 1/4 1/4 1/4 1/4 1/4 3/8 3/8 3/8 3/8 1/2 1/2 1/2 1/2 PC214 PC214-BP* PC215 PC216 PC216-BP* PC316 PC316-BP* PC318 PC318-BP* PC514 PC514-BP* PC516 PC516-BP* Wt. (LB.) P/Piece Part No. Brass Valved Dimension (in.) Dimensions (in.) Overall Hex Largest Overall Hex Largest Length Size Diameter Length Size Diameter Wt. (LB.) Hose P/Piece I.D. 0.13 PC214AV 0.
Mold Coolant Line Couplings Hydraulic Quick Couplings Moldmate Series Nipples D E G Body Size (in.) Part No. Brass Wt. (LB.) P/Piece Brass Part No. Steel Wt. (LB.) P/Piece Steel Thread Size NPTF 1/4 1/4 1/4 3/8 3/8 BPN251F BPN252F BPN253F BPN352F BPN353F 0.02 0.05 0.08 0.05 0.07 PN251F PN252F PN253F PN352F PN353F 0.02 0.04 0.08 0.05 0.06 1/8-27 1/4-18 3/8-18 1/4-18 3/8-18 Dimensions (in.) Overall **Exposed Hex Length Length Size D 0.97 1.28 1.41 1.48 1.58 E 0.58 0.89 1.02 0.88 0.
Mold Coolant Line Couplings Hydraulic Quick Couplings B Hydraulics Moldmate Extension Nipples D E G F Moldmate Series Body Size (in.) Part No.
High Flow Couplings Hydraulic Quick Couplings ST Series The Parker ST Series are non-valved couplings for applications where maximum flow is required. Their smooth, open bore offers the lowest pressure drop of any quick coupling design and is ideal for applications such as high-pressure water and steam washers, carpet cleaners and mold coolant lines and many other non-valved applications. Specifications Body Size (in.
High Flow Couplings Hydraulic Quick Couplings ST Series Features B Hydraulics • The smooth, open bore with no valving in either half offers minimal pressure drop and allows easy cleaning in applications where the same lines are used for more than one media. • ST couplers and nipples are machined from solid barstock, providing a quality coupling that is durable. ST couplers are available in brass and 303 stainless steel as standard product materials.
High Flow Couplings Hydraulic Quick Couplings ST Series D Nipples E Female Pipe Thread F Body Size (in.) Part No. Brass Wt. (LB.) P/Piece Part No. Steel Wt. (LB.) P/Piece Part No. Type 303 Stainless Wt. (LB.) P/Piece Thread Size NPTF Dimensions (in.) Overall Exposed Hex Length Length Size 1/8 1/4 3/8 BST-N1 BST-N2 BST-N3 0.03 0.07 0.12 ST-N1 ST-N2 ST-N3 0.03 0.07 0.11 SST-N1 SST-N2 SST-N3 0.02 0.07 0.11 1/8-27 1/4-18 3/8-18 D .98 1.46 1.62 E 0.57 0.74 0.96 F 0.56 0.75 .088 G 0.
High Flow Couplings Hydraulic Quick Couplings Water Service Series Applications B Hydraulics Parker Water Service Couplings are used anywhere water hoses are connected and disconnected frequently. They are used on a wide variety of applications including garden hoses, wash down systems, and mobile water tank lines. The unvalved design permits maximum flow with minimum pressure drop. Features Specifications Body Size (in.
High Flow Couplings Hydraulic Quick Couplings HO Series HO Series couplings are used in a wide variety of applications. HO couplings are used in refineries, petrochemical plants and paper and pulp mills for connecting hose lines for high pressure hydro-blasting of boilers and pipe lines. They are also used in oil fields on hose lines for internal and external pressure testing of tubing.
Special Purpose–Double Shut-Off Hydraulic Quick Couplings DM Series Applications B Hydraulics Typical applications include dental equipment, lubrication equipment, fluid transfer and coolant lines. Specifications Body Size (in.) Temperature Range Rated Pressure Locking Device Rated Flow (GPM) 1/8" -15°F to +400°F 250 PSI 5 Balls 0.
Special Purpose–Double Shut-Off Hydraulic Quick Couplings DM Series Female Pipe Thread Body Size (in.) A C 1/8 1/8 New Part No. Old Part No. Thread Dimensions (in.) Size Overall Hex Largest Wt. (LB) NPTF Length Size Diameter P/Price A DM-121-2FP CDM02-2-2Y 1/8-27 1.42 DM-121-4FP CDM02-2-4Y 1/4-18 1.81 B 0.55 0.67 C 0.63 0.78 .06 .10 B Male Pipe Thread Body Size (in.) A New Part No. Old Part No. Thread Dimensions (in.) Size Overall Hex Largest Wt.
Dust Plugs and Dust Caps Hydraulic Quick Couplings B Hydraulics Applications Parker offers a complete line of dust plugs and caps for their hydraulic quick couplings. Each series shown in this catalog has a dust plug and cap specifically designed to be used with that style of coupling. Dust plugs and caps serve a twofold function. They keep the mating surface clean and free of contamination and protect the critical mating elements of the coupling halves when they are disconnected.
Hydraulic Quick Couplings Dust Plugs and Dust Caps 4000 Series & 5000 Series Body Size (in.) Dust Plug Part Number Rubber Dust Cap Part No. Rubber 1 1 1/2 HPP-100 HPP-150 HPC-100 HPC-150 Body Size (in.) Dust Plug Part No. Steel Dust Plug Part No. Rubber Dust Cap Part No. Steel Dust Cap Part No. Rubber 1/4 3/8 1/2 3/4 1 – – 5005-4 – – 5205-2M* 5205-3 5205-4M* 5205-5 5205-6 – – 5009-4 – – 5209-2M* 5209-3 5209-4M* 5209-5 5209-6 * Designates all rubber material.
Dust Plugs and Dust Caps Hydraulic Quick Couplings B Hydraulics 9200 Series Body Size (in.) Dust Cap. Part No. Rubber 1/2 9507-4-1 Body Size (in.) Dust Plug Part No. Steel Dust Cap Part No. Steel 1/4 3/8 3005-2 3005-3 3009-2 3009-3 Body Size (in.) Part Number Rubber 3/8 TR-37 3000 Series TC Series Protective cover fits either half. HO Series TR-37 Plug / Cap DC-50 B-62 Body Size (in.) Used With HO Series Coupler/Nipple Part No. Dust Plug Part No. Dust Cap Part No.
Ordering Information Hydraulic Quick Couplings Many of Parker’s coupling products are available with unique non-standard options well suited to very specific applications. Examples of unusual end use applications might include: high temperatures (above 250° F), extremely caustic/corrosive solutions passing through the coupling, external/environmental corrosion situations, or other high wear and tear situations such as dragging the product along the ground.
Promotional Products Hydraulic Quick Couplings B Hydraulics Description These popular coupling key chains are now available from the Quick Coupling Division. The new key chains are an anodized aluminum construction available in an array of colors. Key chains can be ordered using part numbers in the following chart.
C-1 Quick Coupling Division 8145 Lewis Road • Minneapolis, MN 55427 www.parker.
Table of Contents C Thermoplastics Thermoplastic Couplings Coupling Selection Guide ......................................C-3 PF Series..................................................................C-8 Specifications..........................................................C-8 Couplers..................................................................C-9 Nipples ....................................................................C-9 Dust Caps and Plugs ..............................................
Coupling Selection Guide Valving Coupler Style Body Size (in.) Flush Face Non-Spill Push-toConnect 1/2", 1"& 2” Spectrum TM Series Valved or Unvalved Push-toConnect Spectrum TM Series Valved or Unvalved Push-toConnect Spectrum TM Series Valved or Unvalved Push-toConnect PF Series Material Polypropylene/ Stainless and/or Kynar/Hastelloy Acetal 1/8" & 3/8" 316 SS PVDF/SS 1/8" & 3/8" 316 SS 3/8" PVDF/ PEEKTM Locking Std.
Push-To-Connect Thermoplastic Couplings Spectrum™ Series Applications Parker’s Spectrum™ Series couplers are the most advanced engineered thermoplastic couplings available. Spectrum Series couplings combine compact size, high flow capability, and light weight design to meet a broad range of coupling applications. Three material combinations allow the couplings to be used in markets as diverse as chemical processing, automation equipment, semi-conductor and food processing.
Push-To-Connect Thermoplastic Couplings Spectrum™ Series Couplers Body Size (in.) A C B Male Pipe A Acetal* Part No. PVDF* Part No. PVDF/PEEK™* Part No. Port NPT Overall Hex Largest Length Size Diameter A B C 1/8 S2-ACV-02-FP S2-PCV-02-FP — 1/8-27 2.15 .67 .82 1/8 S2-ACV-04-FP S2-PCV-04-FP — 1/4-18 2.34 .67 .82 3/8 S6-ACV-04-FP S6-PCV-04-FP S6-KCV-04-FP 1/4-18 2.63 .82 1.02 3/8 S6-ACV-06-FP S6-PCV-06-FP S6-KCV-06-FP 3/8-18 2.63 .82 1.
Push-To-Connect Thermoplastic Couplings Spectrum™ Series Nipples – Unvalved Female Pipe Body Size (in.) A Acetal Part No. PVDF Part No. PVDF/PEEK™ Part No. Port NPT S2-ANS-02-FP S2-PNS-02-FP — 1/8-27 C 1/8 C Thermoplastics B Male Pipe C Hose Barb A B C .55 .62 S2-ANS-04-FP S2-PNS-04-FP — 1/4-18 1.18 .67 .76 3/8 S6-ANS-04-FP S6-PNS-04-FP — 1/4-18 1.52 .67 .73 3/8 S6-ANS-06-FP S6-PNS-06-FP — 3/8-18 1.52 .83 .91 3/8 S6-ANS-08-FP S6-PNS-08-FP — 1/2-14 1.68 .
Push-To-Connect Thermoplastic Couplings Spectrum™ Series Nipples –Valved Body Size (in.) A C B Male Pipe Acetal Part No. PVDF Part No. PVDF/PEEK™ Part No. Port NPT A B C 1/8 S2-ANV-02-FP S2-PNV-02-FP — 1/8-27 1.61 .67 .76 1/8 S2-ANV-04-FP S2-PNV-04-FP — 1/4-18 1.80 .67 .76 3/8 S6-ANV-04-FP S6-PNV-04-FP S6-KNV-04-FP 1/4-18 2.02 .83 .91 3/8 S6-ANV-06-FP S6-PNV-06-FP S6-KNV-06-FP 3/8-18 2.02 .83 .91 3/8 S6-ANV-08-FP S6-PNV-08-FP S6-KNV-08-FP 1/2-14 2.49 .83 .
Non-Spill Couplings Thermoplastic Couplings PF Series – Chemical Transfer Couplings Features The Parker PF Series Dry Disconnect couplings virtually eliminate fluid loss upon disconnection and are designed to help meet the demand for closed system transfer and dispensing of chemicals and fluids with minimal environmental contamination.
Non-Spill Couplings Thermoplastic Couplings PF Series – Non-Spill Chemical Transfer Couplings Couplers A Body Size (in.) B 1" NPT Part No. Port* Thread Overall Largest Wrench Wt. (LB.) Length Diameter Flats P/Piece 1/2 PF-501-8FP 1/2"NPT 1 PF-1001-16FP 1" NPT 2 PF-2001-32FP 2” NPT A 3.02 3.99 6.63 B 1.88 3.00 5.00 1.38 1.99 - 0.18 0.53 1.75 * Female NPT Threads standard. For other port options contact the division. Body Size (in.) A Part No. Tank Overall Largest Wrench Wt. (LB.
Ordering Information Thermoplastic Couplings C Thermoplastics When ordering Parker coupler bodies and nipples, please state the part number of each type of coupler body and each type of nipple desired. List coupler bodies and nipples as separate items rather than in combinations. Be sure to double check thread or hose sizes of items required. Many of Parker’s coupling products are available with unique non-standard options well suited to very specific applications.
D Swivels Swivels D-1 Quick Coupling Division 8145 Lewis Road • Minneapolis, MN 55427 www.parker.
General Introduction Applications Some common markets and applications for swivels are: • Hose Reels • Pulp and Paper • Pressure Washers • Logging • Machine Tools • Refuse Trucks • Steel Mills • Utility Equipment • Palletizers • Mobile Equipment • And many more… D Swivels • Injection Molding D-2 Quick Coupling Division 8145 Lewis Road • Minneapolis, MN 55427 www.parker.
Table of Contents Swivels Applications ............................................................D-1 S Series Introduction ...........................................................D-27 How To Order ........................................................D-28 90°.........................................................................D-29 Repair Kits ............................................................D-33 Seal Options .........................................................
Introduction Swivels PS Series Introduction Features The design and manufacturing processes vital to a swivel’s quality are the cornerstone of the Quick Coupling Division’s day to day operations. The PS Series Swivel is designed to meet the application needs and performance requirements of the market.
How To Order Swivels PS Series 90° Swivels Shaft Housing Shaft Housing PS Part Number: PS 16 1 02 02 - 16 - 16 Y Seal Code: Blank = Nitrile† A = Aflas™* W = Ethylene Propylene Y = Fluorocarbon Z = Neoprene For Perfluoroelastomer Seal Option Contact the Division. Material and Finish: Blank = Carbon Steel w/Zinc & Yellow Chromate Plating (Std.
In-Line Swivels PS Series Housing O-Ring Back-up Ring Cap Screw Bearing O-Ring Shaft Materials Of Construction Housing*: ............................................................Carbon Steel Shaft*:.................................................................Carbon Steel Plating:* .........................................Zinc with Yellow Chromate Bearing:* .....................................................................Chrome O-Rings:*..........................................................
In-Line Swivels PS Series Male Pipe - Female SAE Straight Thread Part Number A PS410110-4-4 B Hex 1 Hex 2 PS610110-6-6 Port 1 Port 2 PS810110-8-8 PS1210110-12-12 PS1610110-16-16 A B Hex 1 Hex 2 Port 1 Port 2 2.71” 1.72” .75” 1.19” 1/4-18 7/16-20 68.8 mm 43.7 mm 19.0 mm 30.2 mm NPTF UNF-2B 2.74” 1.72” .88” 1.31” 3/8-18 9/16-18 69.6 mm 43.7 mm 22.2 mm 33.3 mm NPTF UNF-2B 3.03” 1.79” 1.12” 1.50” 1/2-14 3/4-16 76.8 mm 45.5 mm 28.6 mm 36.5 mm NPTF UNF-2B 3.
In-Line Swivels PS Series Female Pipe - Male 37° Flare A Part Number B Hex 2 Hex 1 Port 2 PS410203-4-4 PS610203-6-6 Port 1 PS810203-8-8 PS1210203-12-12 3 Piece Design PS1610203-16-16 A B Port 2 Part Number PS2410203-20-20 Port 1 Dia PS2410203-24-24 PS3210203-32-32 A B Hex 1 Hex 2 Port 1 Port 2 2.43” 1.87” .75” 1.19” 1/4-18 7/16-20 61.7 mm 47.5 mm 19.0 mm 30.2 mm NPTF UNF-2A 2.56” 1.90” .88” 1.31” 3/8-18 9/16-18 65.0 mm 48.3 mm 22.2 mm 33.3 mm NPTF UNF-2A 2.
In-Line Swivels PS Series Male 37° Flare - Female Pipe A Part Number B Hex 1 PS410302-4-4 Hex 2 PS610302-6-6 Port 1 Port 2 PS810302-8-8 PS1210302-12-12 PS1610302-16-16 3 Piece Design A B Hex 1 Hex 2 Port 1 Port 2 2.59” 1.60” .75” 1.19” 7/16-20 1/4-18 65.8 mm 40.6 mm 19.0 mm 30.2 mm UNF-2A NPTF 2.66” 1.64” .88” 1.31” 9/16-18 3/8-18 67.5 mm 41.7 mm 22.2 mm 33.3 mm UNF-2A NPTF 2.89” 1.79” 1.12” 1.50” 3/4-16 1/2-14 73.5 mm 45.5 mm 28.6 mm 36.
In-Line Swivels PS Series Male 37° Flare - Female SAE Straight Thread A Part Number B Hex 1 Hex 2 PS410310-4-4 PS610310-6-6 Port 1 Port 2 PS810310-8-8 PS1210310-12-12 PS1610310-16-16 3 Piece Design A B Hex 1 Hex 2 Port 1 Port 2 2.71” 1.72” .75” 1.19” 7/16-20 7/16-20 68.8 mm 43.7 mm 19.0 mm 30.2 mm UNF-2A UNF-2B 2.74” 1.72” .88” 1.31” 9/16-18 9/16-18 69.6 mm 43.7 mm 22.2 mm 33.3 mm UNF-2A UNF-2B 2.89” 1.79” 1.12” 1.50” 3/4-16 3/4-16 73.5 mm 45.5 mm 28.6 mm 36.
In-Line Swivels PS Series Male SAE O-Ring Straight Thread - Male 37° Flare A Part Number PS410503-4-4 B Hex 1 Hex 2 PS610503-6-6 Port 2 Port 1 PS810503-8-8 PS810503-10-10 PS1210503-12-12 PS1610503-16-16 A B Hex 1 Hex 2 Port 1 Port 2 2.71” 1.87” .75” 1.19” 7/16-20 7/16-20 68.9 mm 47.5 mm 19.0 mm 30.2 mm UNF-2A UNF-2A 2.74” 1.90” .88” 1.31” 9/16-18 9/16-18 69.6 mm 48.3 mm 22.2 mm 33.3 mm UNF-2A UNF-2A 3.09” 2.09” 1.12” 1.50” 3/4-16 3/4-16 78.4 mm 53.1 mm 28.
In-Line Swivels PS Series Female SAE Straight Thread - Female Pipe A Part Number B Hex 2 Hex 1 PS411002-4-4 PS611002-6-6 Port 2 Port 1 PS811002-8-8 PS1211002-12-12 PS1611002-16-16 A B Hex 1 Hex 2 Port 1 Port 2 2.16” 1.60” .75” 1.19” 7/16-20 1/4-18 55.0 mm 40.6 mm 19.0 mm 30.2 mm UNF-2B NPTF 2.30” 1.64” .88” 1.31” 9/16-18 3/8-18 58.3 mm 41.7 mm 22.2 mm 33.3 mm UNF-2B NPTF 2.56” 1.79” 1.12” 1.50” 3/4-16 1/2-14 65.0 mm 45.5 mm 28.6 mm 36.5 mm UNF-2B NPTF 2.
In-Line Swivels PS Series Female SAE Straight Thread - O-Ring Face Seal A Part Number B PS4110JM-4-4 Hex 2 Hex 1 PS6110JM-6-6 Port 2 Port 1 PS8110JM-8-8 PS12110JM-12-12 PS16110JM-16-16 A B Hex 1 Hex 2 Port 1 Port 2 2.31” 1.75” .75” 1.19” 7/16-20 9/16-18 58.8 mm 44.5 mm 19.0 mm 30.2 mm UNF-2B UNF-2A 2.41” 1.75” .88” 1.31” 9/16-18 11/16-16 61.1 mm 44.5 mm 22.2 mm 33.3 mm UNF-2B UN-2A 2.67” 1.90” 1.12” 1.50” 3/4-16 13/16-16 67.9 mm 48.3 mm 28.6 mm 36.
In-Line Swivels PS Series O-Ring Face Seal - Female SAE Straight Thread Part Number A PS41JM10-4-4 B Hex 1 Hex 2 PS61JM10-6-6 Port 1 Port 2 PS81JM10-8-8 PS121JM10-12-12 PS161JM10-16-16 A B Hex 1 Hex 2 Port 1 Port 2 2.56” 1.72” .75” 1.19” 9/16-18 7/16-20 65.0 mm 43.7 mm 19.0 mm 30.2 mm UNF-2A UNF-2B 2.56” 1.72” .88” 1.31” 11/16-16 9/16-18 65.0 mm 43.7 mm 22.2 mm 33.3 mm UN-2A UNF-2B 2.79” 1.79” 1.12” 1.50” 13/16-16 3/4-16 70.8 mm 45.5 mm 28.6 mm 36.
90° Swivels PS Series Port 2 Hex 2 Hex 1 Port 1 O-Ring Housing O-Ring Back-Up Ring Cap Screw Bearing O-Ring Shaft Materials Of Construction Housing*: ............................................................Carbon Steel Shaft*:.................................................................Carbon Steel Plating*: .........................................Zinc with Yellow Chromate Bearing*: .....................................................................Chrome O-Rings*:..........................
90° Swivels PS Series Male Pipe - Male SAE O-Ring Straight Thread Part Number A B DIA Port 2 Hex 2 PS490105-4-4 PS690105-6-6 Hex 1 C Port 1 PS890105-8-8 D PS1290105-12-12 PS1690105-16-16 A B C D Dia. Hex 1 Hex 2 Port 1 Port 2 2.85” 2.44” 1.38” 1.98” 1.20” .75” .56” 1/4-18 7/16-20 72.3 mm 62.0 mm 35.0 mm 50.2 mm 30.5 mm 19.0 mm 14.3 mm NPTF UNF-2A 3.05” 2.54” 1.55” 2.20” 1.29” .88” .69” 3/8-18 9/16-18 77.4 mm 64.4 mm 39.4 mm 55.8 mm 32.8 mm 22.2 mm 17.
90° Swivels PS Series Male Pipe - O-Ring Face Seal Part Number A PS4901JM-4-4 DIA Port 2 B Hex 2 PS6901JM-6-6 Hex 1 C Port 1 PS8901JM-8-8 D PS12901JM-12-12 PS16901JM-16-16 A B C D Dia. Hex 1 Hex 2 Port 1 Port 2 2.85” 2.44” 1.29” 1.89” 1.20” .75” .56” 1/4-18 9/16-18 72.3 mm 62.0 mm 32.5 mm 47.9 mm 30.5 mm 19.0 mm 14.3 mm NPTF UNF-2A 3.05” 2.54” 1.40” 2.05” 1.29” .88” .69” 3/8-18 11/16-16 77.4 mm 64.4 mm 35.6 mm 52.0 mm 32.8 mm 22.2 mm 17.
90° Swivels PS Series Female Pipe - Male SAE O-Ring Straight Thread A DIA Port 2 B Part Number PS490205-4-4 Hex 2 Hex 1 PS690205-6-6 C D Port 1 PS890205-8-8 PS1290205-12-12 PS1690205-16-16 A B C D Dia. Hex 1 Hex 2 Port 1 Port 2 2.42” 2.01” 1.38” 1.98” 1.20” .75” .56” 1/4-18 7/16-20 61.4 mm 51.2 mm 35.0 mm 50.2 mm 30.5 mm 19.0 mm 14.3 mm NPTF UNF-2A 2.68” 2.17” 1.55” 2.20” 1.29” .88” .69” 3/8-18 9/16-18 68.2 mm 55.2 mm 39.4 mm 55.8 mm 32.8 mm 22.2 mm 17.
90° Swivels PS Series Female Pipe - O-Ring Face Seal A Port 2 Part Number DIA B PS4902JM-4-4 Hex 2 Hex 1 PS6902JM-6-6 C PS8902JM-8-8 D Port 1 PS12902JM-12-12 PS16902JM-16-16 A B C D Dia. Hex 1 Hex 2 Port 1 Port 2 2.42” 2.01” 1.29” 1.89” 1.20” .75” .56” 1/4-18 9/16-18 61.4 mm 51.2 mm 32.5 mm 47.9 mm 30.5 mm 19.0 mm 14.3 mm NPTF UNF-2A 2.68” 2.17” 1.40” 2.05” 1.29” .88” .69” 3/8-18 11/16-16 68.2 mm 55.2 mm 35.6 mm 52.0 mm 32.8 mm 22.2 mm 17.
90° Swivels PS Series Male 37° Flare - Male SAE O-Ring Straight Thread Part Number A Port 2 B Hex 1 DIA PS490305-4-4 PS690305-6-6 Hex 2 C Port 1 PS890305-8-8 D PS1290305-12-12 PS1690305-16-16 A B C D Dia. Hex 1 Hex 2 Port 1 Port 2 2.85” 2.44” 1.38” 1.98” 1.20” .75” .56” 7/16-20 7/16-20 72.3 mm 62.0 mm 35.0 mm 50.2 mm 30.5 mm 19.0 mm 14.3 mm UNF-2A UNF-2A 3.05” 2.54” 1.55” 2.20” 1.29” .88” .69” 9/16-18 9/16-18 77.4 mm 64.4 mm 39.4 mm 55.8 mm 32.8 mm 22.
90° Swivels PS Series Male 37° Flare - O-Ring Face Seal A Port 2 DIA B Hex 1 Part Number PS4903JM-4-4 Hex 2 PS6903JM-6-6 C Port 1 D PS8903JM-8-8 PS8903JM-10-10 PS12903JM-12-12 PS16903JM-16-16 A B C D Dia. Hex 1 Hex 2 Port 1 Port 2 2.85” 2.44” 1.29” 1.89” 1.20” .75” .56” 7/16-20 9/16-18 72.3 mm 62.0 mm 32.5 mm 47.9 mm 30.5 mm 19.0 mm 14.3 mm UNF-2A UNF-2A 3.05” 2.54” 1.40” 2.05” 1.29” .88” .69” 9/16-18 11/16-16 77.4 mm 64.4 mm 35.6 mm 52.0 mm 32.8 mm 22.
90° Swivels PS Series Male SAE O-Ring Straight Thread - Female 37° Flare Part Number A B DIA Port 2 Hex 2 PS490506-4-4 PS690506-6-6 Hex 1 C Port 1 PS890506-8-8 D PS1290506-12-12 PS1690506-16-16 A B C D Dia. Hex 1 Hex 2 Port 1 Port 2 2.70” 2.29” 1.47” 2.07” 1.20” .75” .56” 7/16-20 7/16-20 68.6 mm 58.3 mm 37.3 mm 52.5 mm 30.5 mm 19.0 mm 14.3 mm UNF-2A UNF-2B 2.87” 2.36” 1.57” 2.22” 1.29” .88” .69” 9/16-18 9/16-18 72.8 mm 59.8 mm 39.9 mm 56.3 mm 32.
90° Swivels PS Series Female SAE Straight Thread - Female Pipe A Part Number B PS491002-4-4 Hex 1 Port 2 PS691002-6-6 Port 1 PS891002-8-8 DIA PS1291002-12-12 PS1691002-16-16 A B Dia. Hex 1 Port 1 Port 2 2.42” 2.01” 1.20” .75” 7/16-20 1/4-18 61.4 mm 51.2 mm 30.5 mm 19.0 mm UNF-2B NPTF 2.68” 2.17” 1.29” .88” 9/16-18 3/8-18 68.2 mm 55.2 mm 32.8 mm 22.2 mm UNF-2B NPTF 2.96” 2.37” 1.49” 1.12” 3/4-16 1/2-14 75.3 mm 60.3 mm 37.8 mm 28.6 mm UNF-2B NPTF 3.43” 2.
90° Swivels PS Series Female SAE Straight Thread - Female SAE Straight Thread A Part Number B Hex 1 Port 2 PS491010-4-4 PS691010-6-6 Port 1 DIA PS891010-8-8 PS1291010-12-12 PS1691010-16-16 3 Piece Design A B Part Number D Port 2 C PS2491010-20-20 Port 1 PS2491010-24-24 Dia PS3291010-32-32 A B Dia. Hex 1 Port 1 Port 2 2.42” 2.01” 1.20” .75” 7/16-20 7/16-20 61.4 mm 51.2 mm 30.5 mm 19.0 mm UNF-2B UNF-2B 2.68” 2.17” 1.29” .88” 9/16-18 9/16-18 68.2 mm 55.2 mm 32.
90° Swivels PS Series O-Ring Face Seal - Male SAE O-Ring Straight Thread Part Number A B DIA Port 2 PS49JM05-4-4 Hex 2 PS69JM05-6-6 Hex 1 C Port 1 PS89JM05-8-8 D PS129JM05-12-12 PS169JM05-16-16 A B C D Dia. Hex 1 Hex 2 Port 1 Port 2 2.70” 2.29” 1.38” 1.98” 1.20” .75” .56” 9/16-18 7/16-20 68.6 mm 58.3 mm 35.0 mm 50.2 mm 30.5 mm 19.0 mm 14.3 mm UNF-2A UNF-2A 2.87” 2.36” 1.55” 2.20” 1.29” .88” .69” 11/16-16 9/16-18 72.8 mm 59.8 mm 39.4 mm 55.8 mm 32.
Repair Kits Swivels Repair Kits/Seal Options Repair Kits come complete with O-Rings, PTFE Back-Up Ring, Cap Screws, Locking Balls, Retaining Ring and grease fitting. Repair kits are suitable for both current and previous design 90° PS Series Swivels.
Introduction Swivels S Series S Series Swivels Specifications Introduction The S Series Swivel product line complements the Quick Coupling Division’s PS Series swivel line by offering a pressure balanced, compact forged body design. As a result of the pressure balanced design, the S Series Swivel does not experience a significant increase in torque as pressure rises. The housing body is forged to provide superior performance and durability in tough applications.
How To Order Swivels S Series Port 1 Port 2 O-Ring Shaft Back-Up Ring O-Ring Flow Holes Housing O-Ring Back-Up Ring D Swivels O-Ring Retainer Retaining Ring S Part Number: S 21 02 V - 8 - 8 NI Material and Finish: Blank = Carbon Steel (12L14) Yellow Chromate Plating NI = Carbon Steel (12L14)* Nickel Plating Housing Port Size (1/16 of an inch) Shaft Port Size (1/16 of an inch) Housing Port Configuration: 01 = Male NPTF 02 = Female NPTF 03 = Male JIC 37 Degree 05 = Male SAE O-Ring Straight Thread 07
90° Swivels S Series Male Pipe - Male Pipe A B Hex 1 Port 1 Part Number A B C D HEX 1 HEX 2 PORT 1 PORT 2 S2101-4-4 2.31" 1.51" 2.19" 1.50" .88" .88" 1/4-18 NPTF 1/4-18 NPTF 58.7 mm 38.4 mm 55.5 mm 38.0 mm 22.2 mm 22.2 mm 2.31" 1.51" 2.19" 1.50" .88" .88" 3/8-18 NPTF 3/8-18 NPTF 58.7 mm 38.4 mm 55.5 mm 38.0 mm 22.2 mm 22.2 mm 1/2-14 NPTF 1/2-14 NPTF 3/4-14 NPTF 3/4-14 NPTF S2101-6-6 C S2101-8-8 D S2101-12-12 Port 2 2.74" 1.84" 2.59" 1.84" 1.06" 1.
90° Swivels S Series Female Pipe - Male Pipe A Hex 1 B Port 1 Part Number A B C D HEX 1 HEX 2 PORT 1 PORT 2 S2201-4-4 2.19" 1.39" 2.19" 1.50" .88" .88" 1/4-18 NPTF 1/4-18 NPTF 55.6 mm 35.4 mm 55.5 mm 38.0 mm 22.2 mm 22.2 mm 2.19" 1.39" 2.19" 1.50" .88" .88" 3/8-18 NPTF 3/8-18 NPTF 55.6 mm 35.4 mm 55.5 mm 38.0 mm 22.2 mm 22.2 mm 1/2-14 NPTF 1/2-14 NPTF 3/4-14 NPTF 3/4-14 NPTF S2201-6-6 C S2201-8-8 D S2201-12-12 Port 2 2.47" 1.57" 2.59" 1.84" 1.06" 1.
90° Swivels S Series Male 37° Flare - Male Pipe A B Hex 1 Port 1 Part Number A B C D HEX 1 HEX 2 PORT 1 PORT 2 S2301-4-4 2.41" 1.61" 2.19" 1.50" .88" .88" 7/16-20UNF-2A 1/4-18 NPTF 61.2 mm 40.9 mm 55.5 mm 38.0 mm 22.2 mm 22.2 mm 2.41" 1.61" 2.19" 1.50" .88" .88" 9/16-18UNF-2A 3/8-18 NPTF 61.2 mm 40.9 mm 55.5 mm 38.0 mm 22.2 mm 22.2 mm 3/4-16UNF-2A 1/2-14 NPTF 1-1/16-12UN-2A 3/4-14 NPTF S2301-6-6 C S2301-8-8 D S2301-12-12 Port 2 2.63" 1.73" 2.59" 1.84" 1.
90° Swivels S Series Male SAE O-Ring Straight Thread - Male Pipe A Hex 1 B Part number A B C D HEX 1 HEX 2 PORT 1 PORT 2 S2501-6-6 2.13" 1.33" 2.19" 1.50" .88" .88" 9/16-18UNF-2A 3/8-18 NPTF 54.1 mm 33.8 mm 55.5 mm 38.0 mm 22.2 mm 22.2 mm 2.40" 1.50" 2.59" 1.84" 1.06" 1.00" 3/4-16UNF-2A 1/2-14 NPTF 61.0 mm 38.2 mm 65.8 mm 46.7 mm 27.0 mm 25.4 mm 1-1/16-12UN-2A 3/4-14 NPTF Port 1 S2501-8-8 C S2501-12-12 D Port 2 3.40" 2.17" 3.00" 2.11" 1.38" 1.38" 86.
Repair Kits Swivels Repair Kits/Seal Options Repair Kits come complete with primary O-Rings, PTFE backup rings, external and internal dust seals, retaining ring and instruction sheet.
E Check Valves Check Valves E-1 Quick Coupling Division 8145 Lewis Road • Minneapolis, MN 55427 www.parker.
Introduction Check Valves Multiple Hydraulic System Applications applications. Parker's in-line style of Check Valves are available in a variety of sizes, pressure ratings, flow capacities and crack pressures. E Check Valves Parker Check Valves are unidirectional flow control devices used primarily in hydraulic systems to eliminate potential damage caused by fluid back pressure.
Table of Contents Check Valves Introduction .............................................................E-2 Selection Guide .......................................................E-4 Features & General Technical Information .............................................E-4 DT Series ........................................................E-5 – E-7 Ordering Information ...............................................E-8 E Check Valves CV Series......................................................
Technical Information Check Valves Pressure at inlet port. Poppet is moved off seat. Flow is allowed through valve. Selection Guide Poppet Seat Body Size Inlet Port Material Rated Pressure Crack Pressure CV Series 1/4 - 1" Steel 3000 PSI 5-130 PSI DT Series 1/4 - 1 1/4" Steel 5000 PSI 5-200 PSI Outlet Port Features Parker’s Check Valves employ several unique features that insure years of trouble-free operation.
DT Series Check Valves Parker DT Series Check Valves Offer the Features of a Compact Body Size, and 5000 PSI Maximum Operating Pressure. The DT Series check valves utilize the dependable, internal design features found in Parker check valves, but with the added benefit and convenience of compact design. Sizes are available from 1/4" to 1-1/4" with six different Fitting Styles. The DT Series expands Parker's high quality product line of versatile and efficient check valves. Features: 1. Compact Design.
DT Series Check Valves Specifications The DT Series check valves have a Maximum Operating Pressure of 5000 PSI. Standard Crack Pressures are 1, 5, and 65 PSI. Other Crack Pressures up to 200 PSI in 5 PSI increments are available upon request. DT-MFMF Male Flare 37° JIC Inlet to Male Flare 37° JIC Outlet Valve Size (inch) Part Number Inlet Port Thread A E F Hex B C E Hex ** Std Crack Size Pressures (inch) (PSI) B C D 3/8 DT-370-MFMF-** 9/16-18 UNF .56 .44 .56 9/16-18 UNF .
DT Series Check Valves DT-MOMS Male O-Ring Boss Inlet to Male Seal-Lok® Outlet Valve Size (inch) Inlet Port Thread Part Number A FLOW E B C D DT-250-MOMS-** 7/16-20 UNF .43 .45 .39 .62 5 3/8 DT-370-MOMS-** 9/16-18 UNF .47 .44 .44 11/16-16 UN .75 1, 5, 65 1/2 DT-500-MOMS-** 3/4-16 UNF .55 .50 .51 13/16-16 UN .88 5/8 DT-620-MOMS-** 7/8-14 UNF .63 .50 .
DT Series Check Valves Flow Data DT Series (1/2", 5/8" & 3/4") Test Fluid: Oil - 200 SUS DT Series (1/4" & 3/8") Test Fluid: Oil - 200 SUS 110 100 100 Pressure Drop in PSID 90 Pressure Drop in PSID 90 80 1/4" (DT-250) 70 60 3/8" (DT-370) 50 40 30 80 3/4" (DT-750) 70 60 50 1/2" & 5/8" (DT-500 / DT-620) 40 30 20 20 10 10 0 0 0 1 2 3 4 5 6 7 8 9 10 80 90 0 2 4 6 8 10 12 14 16 18 20 22 24 26 28 30 32 Flow in USGPM Flow in USGPM DT Series (1" & 1-1/4") Test Flu
CV Series Check Valves CV Series Check Valves Offer Port Thread Options for Special Plumbing Requirements Parker’s CV Series check valves are a rugged built and versatile product designed to protect hydraulic systems from fluid back pressure. The CV Series compliments the DT Series by adding the feature of modular design. This two piece body design offers more end configurations than a one piece body. The larger body also results in less pressure drop and increased performance.
Check Valves Specifications CV-MFMF Male Flare 37° JIC Inlet to Male Flare 37° JIC Outlet B HEX TYP A Max ** Std Crack Operating Outlet Port Pressures Pressure Thread (PSI) (PSI) Valve Size (inch) Part Number Inlet Port Thread Dimensions (inch) A B Hex 1/4 CV-250-MFMF-** 7/16-20 UNF 1.53 .68 7/16-20 UNF 5, 65 3/8 CV-370-MFMF-** 9/16-18 UNF 1.75 .81 9/16-18 UNF 5, 65 3000 1/2 CV-500-MFMF-** 3/4-16 UNF 2.22 1.
CV Series Check Valves CV-FPFP Female Pipe Thread Inlet to Female Pipe Thread Outlet Valve Size (inch) Part Number B HEX TYP A Inlet Port Thread Dimensions (inch) Max ** Std Crack Operating Outlet Port Pressures Pressure Thread (PSI) (PSI) A B Hex 1/4 CV-250-FPFP-** 1/4-18 NPSF 1.53 .75 1/4-18 NPSF 5, 65 3000 3/8 CV-370-FPFP-** 3/8-18 NPSF 1.75 .81 3/8-18 NPSF 5, 65 3000 1/2 CV-500-FPFP-** 1/2-14 NPSF 2.22 1.12 1/2-14 NPSF 5, 65 3000 3/4 CV-750-FPFP-** 3/4-14 NPSF 2.
F Diagnostic Quick Coupling Diagnostic Products F-1 Quick Coupling Division 8145 Lewis Road • Minneapolis, MN 55427 www.parker.
Introduction Diagnostic Products and easy access into hydraulic or pneumatic systems at remote test points without the use of tools. Increasing productivity and profitability are the key elements for a company to successfully compete in the world market today. Diagnostic nipples can be permanently installed in threaded test ports in hydraulic components such as valves, cylinders, accumulators, filters or pumps.
Table of Contents Diagnostic Products Test Port Couplings PD Series....................................................F-18 - F-20 Dust Cap..............................................................F-18 Couplers ..............................................................F-19 Nipples ......................................................F-19 - F-20 Tube End Nipples ................................................F-20 PDP Series .................................................F-21 - F-23 Dust Cap.....
Product Selection Guide Diagnostic Products Meter Selection Guide Function ServiceJunior Serviceman Level 1 Serviceman Level 2 ServiceMaster 350 ServiceMaster 450 • Pressure Sensing • •1 •1 •1 • •1 •1 •1 • • • • • • • • • • • AA (2 req’d) Rechargeable Ni-MH Flow Sensing Temperature Sensing Rotational Speed Sensing • •1 •2 • • • • • • Auxiliary Sensing Pressure Differential Automatic Sensor Recognition Auto Power Off Battery Monitoring Battery Type • •1 •2 • • • • • • Rechargeable Ni-MH Recha
SensoControl ®ServiceJunior ™ Diagnostic Products Technical Data The new Parker ServiceJunior captures momentary pressure spikes that are “invisible” to normal liquid-filled gauges. That means the maximum pressure reading it delivers can be trusted as a much truer reflection of the system’s actual condition; so you can identify potential problems better and diagnose their causes faster. All readings are accurate to within +/-0.5%.
SensoControl® Serviceman™ Diagnostic Products General Hand-held diagnostic meter to measure pressure, temperature, flow and rotational speed for hydraulic and pneumatic systems • • • • • • • Easy operation Rugged design Compact dimensions Large display Auto sensor recognition MIN/MAX Memory Hold function • • • • Pressure differential Low power consumption External power supply Data output for PC* *SCM-150-1-02 Only F Diagnostic The Serviceman™ SCM-150 from Parker is a modern portable diagnostic meas
SensoControl® Serviceman™ Diagnostic Products Schematic SensoControl® Serviceman™ Measure and Document Flow, Pressure, Temperature and Rotation Speed SCK-700-00-58 Meter SCM–150–1–01 INP1 INP2 Meter SCM–150–1–02 bar INP1 INP2 bar ON/OFF RESET ON/OFF RESET INP1/2 MAX INP1/2 MAX PRINT HOLD MIN PRINT MIN HOLD SensoControl SCM-150 INPUT1 SCPR-150-1-01 Fiber Optic Connector SensoControl SCM-150 INPUT2 INPUT1 INPUT2 PC F Diagnostic Computer Adapter Software Kit SCDA-KIT-152 or S
SensoControl® Serviceman™ Diagnostic Products Technical Data Pressure Transducers Technical Data Meter • 4 Digit LCD Text Display • 13 mm Character Height • Display of Pressure, Temperature, Flow and Rotational Speed - Pressure in PSI and Bar Temperature in °F and °C Flow in GPM and l/min.
SensoControl® Serviceman™ Diagnostic Products Components and Accessories Order Code Order No.
SensoControl® Serviceman™ Diagnostic Products Test Meter Kits Test Meter Kits Serviceman Level 1 Meter Kit SCC-150 SCM-150-1-01 (See Below) SCSN-450 SCM150-TM Kit Contents: Case Serviceman Meter Transducers (Quantity 1 or 2) Power Supply – Meter Instruction Manual* Serviceman Level 2 Meter Kit SCC-150 SCM-150-1-02 (See Below) SCSN-450 SCM150-TM * Included with Serviceman Meter Code for Ordering Serviceman Meter Kits: PD XX - XXX - XX - XX (If second Transducer is ordered as part of Kit) Port Style
SensoControl® ServiceMaster™ Diagnostic Products General Hand-held diagnostic meter to measure pressure, temperature, flow and rotational speed for hydraulic and pneumatic systems • Easy operation • Rugged design • Large display • Auto sensor recognition • MIN/MAX Memory • On-line operation • Multiple sensor inputs • Battery monitoring The ServiceMaster™ meter is a stateof-the-art instrument designed to provide the latest in diagnostic evaluation in hydraulic and pneumatic systems.
SensoControl® ServiceMaster™ Diagnostic Products Schematic SensoControl® ServiceMaster™ Measure and Document Flow, Pressure, Voltage, Current Temperature and Rotation Speed Meter SCM-350-1-01 Meter SCM-450-1-01 ServiceMaster ServiceMaster ON/OFF SETUP OPTION ON/OFF DATA OUTPUT RECORD DATA OUTPUT STOP START ESC |1 - |2 |1 = |2 RECORD STOP ENTER START ESC |1 - |2 |1 = |2 TEMP MIN/MAX ACTUAL RESET Meter Power Supply / Recharger SCSN-450 SETUP OPTION ENTER TEMP SensoControl MIN/MAX A
SensoControl® ServiceMaster™ Diagnostic Products Technical Data Meter • Digital LCD Text Display -128x64 pixels • Automatic Character Height Scaling • Display of Pressure, Temperature, Flow and Rotational Speed - Pressure in PSI and Bar - Temperature in °F and °C - Flow in GPM and l/min.
SensoControl® ServiceMaster™ Diagnostic Products Transducer Features • Five measurement ranges (Vacuum to 8700 PSI) • Color coded for easy identification • Corrosion proof stainless steel housing • Accuracy of .5% Full Scale (FS) Transducer Technical Data Measuring Range (Pressure) Color Code Measuring Range (Temp.) Max. Overload Pressure Output Signal (Volts) Hysteresis (% FS Typical) Repeatability (%FS Typical) Non-conformity (%FS) Response Time Excitation Voltage PD ✳ ✳ -0100 -14.
SensoControl® ServiceMaster™ Diagnostic Products Components and Accessories Order Code Order No.
SensoControl® ServiceMaster™ Diagnostic Products Test Meter Kits Test Meter Kits ServiceMaster 350 Meter Kit SC-690 SCM-350-1-01 (See Below) SCK-102-02-02 SCSN-450 SCSW-400 SCK-313-02-31 Kit Contents: Case ServiceMaster Meter Transducers (Quantity 2) Transducer Cable, 6.5’ (Quantity 2) Power Supply – Meter SensoWin Software 4.
SensoControl® Diagnostic Products Flow Sensors Description The SensoControl® Generation II flow sensors are a compact light-weight aluminum diagnostic tool capable of measuring pressure, temperature and flow from a single test point in a hydraulic system. The Generation II flow sensors are designed to be used with a wide variety of hydraulic fluids. This design also minimizes the effect of viscosity changes.
Test Port Couplings Diagnostic Products PD Series Applications PD Series couplings provide easy connection for mechanical gauges or specialized diagnostic equipment like SensoControl®. Typically, PD or BPD nipples are permanently mounted in the system at threaded test ports, in rigid tubing or in hose assemblies. PD couplers are attached to test instruments. Couplers align to the mating nipples without threading.
Test Port Couplings Diagnostic Products PD Series Couplers Female Thread A Body Size (in.) Part No. Female Thread NPTF Female Thread ORB 1/8 1/8 1/8 1/8 1/8 PD222 PD240 PD242 SSPD242Y** PD260 1/8-27 – 1/4-18 1/4-18 – – 7/16-20 – – 9/16-18 Body Size (in.) Part No. Male Thread NPTF Male Thread ORB 1/8 PD243 1/4-18 – C B Male Thread Dimensions (in.) Overall Wrench Largest Wt. (LB.) Length Flats Diameter P/Piece A 1.67 2.12 2.12 2.12 2.12 B 0.81 0.81 0.81 0.81 0.81 C 0.96 0.96 0.96 0.
Test Port Couplings Diagnostic Products PD Series Nipples Bulkhead Triple-Lok D E G F Bulkhead Seal-Lok D E G F Body Size (in.) Part No. Steel Thread Size Tube Size Dimensions (in.) Overall Exposed Hex Length Length Size 1/8 1/8 1/8 PD345 PD355 PD365 7/16-20 1/2-20 9/16-18 1/4 5/16 3/8 Body Size (in.) Part No. Steel Thread Size Tube Size 1/8 PD346 9/16-18 1/4 D 2.98 E 2.27 F 0.81 G 0.94 – 1/8 1/8 PD366 11/16-16 PD386 13/16-16 3/8 1/2 3.08 3.18 2.37 2.47 1.00 1.12 1.16 1.
Test Port Couplings Diagnostic Products PDP Series Applications The PDP Series couplings provide easy connection for mechanical gauges or specialized diagnostic equipment like SensoControl. Typically, PDP nipples are permanently mounted in the system at threaded test ports, in rigid tubing or in hose assemblies. PDP couplers are attached to test instruments.
Test Port Couplings Diagnostic Products EMA3 Series Applications EMA couplings provide easy diagnostic connections for Parker SensoControl® equipment or mechanical gages. EMA test points are typically permanently plumbed into a fluid system at locations where pressure measurements are required for maintenance or testing. Integral pressure cap protects the test point from damage and prevents contamination of the fluid system.
Test Port Couplings Diagnostic Products PDP Series Nipples* (connect-under-pressure) Male Pipe Body Size (in.) Part No. Steel Thread Size NPTF Overall Length 1/8 1/8 PDP323 PDP343 1/8-27 1/4-18 D 2.02 1.48 Body Size (in.) Part No. Steel Thread Size ORB Overall Length 1/8 1/8 PDP341 PDP361 7/16-20 9/16-18 D 2.06 1.48 Dimensions (in.) Exposed Hex Length Size E 1.46 0.93 F 0.69 0.69 Largest Diameter Wt. (LB.) P/Piece G 0.79 0.79 0.26 0.12 Largest Diameter Wt. (LB.) P/Piece G 0.79 0.
Test Port Couplings Diagnostic Products EMA3 Series EMA Gauge Adapter Part No. Port Thread Size Hex Size (mm) Port Thread Size MAV1/4NPT-MA3 MAV1/4NPT-MA3-KM A 1/4-18NPT 1/4-18NPT B 19 19 C M16X2.0 M16X2.0 Part No. Port Thread Size Hex Size (mm) Port Thread Size MAVMD1/4NPT-MA3 A 1/4-18NPT B 19 C M16X2.0 Part No. Port Thread Size Hex Size (mm) Port Thread Size EMA3VS A M16X2.0 B 17 C M16X2.0 Overall Wt. (LB.) Length P/Piece D 2.22 2.22 0.16 0.
Test Port Couplings Diagnostic Products Transducer Adapters Transducer Adapters 1/2-14BSPP Thread* Part No. Overall Length Hex Size Largest Diameter Port Thread Size Interface Thread Size Wt. (LB.) P/Piece PD288 A 2.52 B 1.19 C 1.38 D 1/2-14BSPP E – 0.35 Part No. Overall Length Hex Size Largest Diameter Port Thread Size Interface Thread Size Wt. (LB.) P/Piece PDP288 A 2.58 B 1.19 C 1.38 D 1/2-14BSPP Part No. Overall Length Hex Size Metric Largest Diameter SCA-1/2-EMA-3 A 2.
Test Port Couplings Diagnostic Products Fluid Sampling Features These diagnostic fluid sampling products are designed to provide an easy access point for obtaining fluid samples. A permanently mounted test point eliminates the need to shut down or break lines when taking samples and reduces the chances of contamination. Fluid analysis is crucial in both engines and hydraulic systems as it can reveal problems with filtration and other internal components.
Ordering Information Diagnostic Products When ordering Parker coupler bodies and nipples, please state the part number of each type of coupler body and each type of nipple desired. List coupler bodies and nipples as separate items rather than in combinations. Be sure to double check thread or hose sizes of items required.
Appendices Appendices 1 Parker Hannifin Corporation Quick Coupling Division Minneapolis, MN 55427
Fluid Compatibility Chart PF Series (Plastic/Polypropylene Material) Appendices Ratings Code: – – P — # – – – Good to excellent. Little or no swelling, tensile or surface changes. Preferred choice. Marginal or conditional. Noticeable effects but not necessarily indicating lack of serviceability. Further testing suggested for specific application. Very long-term effects such as stiffening or potential for crazing should be evaluated. Poor or unsatisfactory.
Fluid Compatibility Chart Appendices Codes Note The following seal compound and body material compatibility chart is provided as an aid in selecting a specific synthetic rubber compound or body material for a particular application. Operating and environmental conditions must be considered when making the selection of a quick coupling.
Fluid Compatibility Chart CODES: 1 = Satisfactory 2 = Fair 3 = Not Recommended 4 = Insufficient Data Available BODY MATERIAL MEDIA AROMATIC FUEL - 50% ARSENIC ACID ASPHALT ASTM OIL, NO. 1 ASTM OIL, NO. 2 ASTM OIL, NO. 3 ASTM OIL, NO.
Fluid Compatibility Chart Appendices CODES: 1 = Satisfactory 2 = Fair 3 = Not Recommended 4 = Insufficient Data Available BODY MATERIAL Appendices MEDIA CHLORPHENOL COCOANUT OIL COPPER CHLORIDE COPPER SALTS COPPER SULFATE CORN OIL COTTONSEED OIL CREOSOLS CREOSOTE CRESYLIC ACID CRUDE OIL CUTTING OIL DECANE DENATURED ALCOHOL DETERGENT, WATER SOLUTION DIESEL FUEL DIETHYLENE GLYCOL DIMETHYL FORMAMIDE DOW CHEMICAL HD50-4 DOW CORNING 200, 510, 550 DOWTHERM A,E ETHANOL ETHYL CHLORIDE ETHYL HEXANOL ETHYLENE
Fluid Compatibility Chart Appendices 2 = Fair 3 = Not Recommended 4 = Insufficient Data Available BODY MATERIAL MEDIA METHYL CHLORIDE (DRY) METHYL CHLORIDE (WET) METHYL ETHER METHYL ETHYL KETONE (MEK) MIL-F-81912 (JP-9) MIL-H-5606 MIL-H-6083 MIL-H-7083 MIL-H-8446 (MLO-8515) MIL-L-2104 & 2104B MIL-L-7808 MILK MINERAL OILS MLO-7277 AND MLO-7557 MOBILE HF MONOMETHYL HYDRAZINE NAPHTHA (COAL OR PETROLEUM) NAPHTHALENE NAPHTHENIC ACID NEATSFOOT OIL NICKEL, ACETATE NICKEL CHLORIDE NICKEL SALTS NICKEL SULFATE NI
Fluid Compatibility Chart Appendices CODES: 1 = Satisfactory 2 = Fair 3 = Not Recommended 4 = Insufficient Data Available BODY MATERIAL Appendices MEDIA PYDRAUL 10E PYDRAUL A-200, C SERIES PYDRAUL, 3 SERIES PYROGARD 42, 43, 53, 55 (PHOSPHATE ESTER) PYROGARD D SEA WATER (SALT WATER) SHELL IRUS 905 SILICONE GREASES SILVER NITRATE SKYDROL 500, TYPE 2 SKYDROL 7000, TYPE 2 SOAP SOLUTIONS SODIUM ACETATE SODIUM BICARBONATE (BAKING SODA) SODIUM BISULPHATE OR BISULPHITE SODIUM BORATE SODIUM CARBONATE (SODA AS
Safety Guide Appendices SAFETY GUIDE FOR SELECTING AND USING QUICK ACTION COUPLINGS AND RELATED ACCESSORIES DANGER: Failure or improper selection or improper use of quick action couplings or related accessories can cause death, personal injury and property damage. Possible consequences of failure or improper selection or improper use of quick action couplings or related accessories include but are not limited to: • Couplings or parts thrown off at high speed. • Dangerously whipping hose.
Safety Guide Appendices 3.0 QUICK ACTION COUPLING INSTALLATION INSTRUCTIONS 4.1 Even with proper selection and installation, quick action coupling life may be significantly reduced without a continuing maintenance program. Frequency should be determined by the severity of the application and risk potential. A maintenance program must be established and followed by the user and must include the following as a minimum: 3.
Alpha Numeric Index Appendices Note 2. Catalog numbers ending in the letter W, Y, or Z are not listed in this index, as these suffixes merely designate the use of an optional seal. The item can be located in the catalog by referring to the basic number without the W, Y or Z suffix. This does not apply to SM, HP, NS, NC, FF, FS, FH, TC, and HO Series. Please see ordering information at the end of Section B. Part No. Page A2C.........................................A-15 A3C...............................
Alpha Numeric Index Appendices Appendices Part No. Page CV-370-MFMF.........................E-10 CV-370-MOMS........................E-10 CV-500-FOFO.........................E-10 CV-500-FPFP.........................E-11 CV-500-MFMF.........................E-10 CV-500-MOMS........................E-10 CV-620-FOFO.........................E-10 CV-620-MFMF ........................E-10 CV-620-MOMS........................E-10 CV-750-FOFO.........................E-10 CV-750-FPFP .........................
Alpha Numeric Index Part No. Page FS-751-12FP ..........................B-34 FS-751-KIT .............................B-34 FS-751-KIT-E5 ........................B-34 FS-752-12FO..........................B-34 FS-752-12FP ..........................B-34 FS-752-KIT .............................B-34 FS-752-KIT-E5 ........................B-34 H00E.........................................A-6 H0C...........................................A-6 H0E...........................................A-6 H0F ..................
Alpha Numeric Index Appendices Appendices Part No. Page NS-501-8FB............................B-21 NS-501-8FP............................B-21 NS-502-10FO .........................B-21 NS-502-8FB............................B-21 NS-502-8FP............................B-21 NS-751-12FB..........................B-21 NS-751-12FO .........................B-21 NS-751-12FP..........................B-21 NS-752-12FB..........................B-21 NS-752-12FO .........................B-21 NS-752-12FP................
Alpha Numeric Index Part No. Page PS12110JM-12-12..................D-13 PS121JM02-12-12..................D-13 PS121JM03-12-12..................D-13 PS121JM06-12-12..................D-13 PS121JM10-12-12...................D14 PS121JMJM-12-12 ..................D14 PS1290102-12-12 ..................D-15 PS1290103-12-12 ..................D-15 PS1290105-12-12 ..................D-16 PS1290106-12-12 ..................D-16 PS1290107-12-12 ..................D-16 PS1290110-12-12 ..................
Alpha Numeric Index Appendices Appendices Part No. Page PS690302-6-6 ........................D-19 PS690303-6-6 ........................D-19 PS690305-6-6 ........................D-20 PS690306-6-6 ........................D-20 PS690307-6-6 ........................D-20 PS690310-6-6 ........................D-20 PS6903JM-6-6........................D-21 PS690502-6-6 ........................D-21 PS690503-6-6 ........................D-21 PS690505-6-6 ........................D-21 PS690506-6-6 ...................
Alpha Numeric Index Part No. Page S2-PCV-03-HB .........................C-5 S2-PCV-04-BHB .......................C-5 S2-PCV-04-FP ..........................C-5 S2-PCV-04-HB .........................C-5 S2-PCV-04-MP .........................C-5 S2-PNS-02-FP..........................C-6 S2-PNS-02-MP.........................C-6 S2-PNS-03-BHB.......................C-6 S2-PNS-03-HB .........................C-6 S2-PNS-04-BHB.......................C-6 S2-PNS-04-FP..........................C-6 S2-PNS-04-HB .....
Alpha Numeric Index Appendices Appendices Part No. Page SST-1M ...................................B-54 SST-2M ...................................B-54 SST-3M ...................................B-54 SST-4M ...................................B-54 SST-6M ...................................B-54 SST-8M ...................................B-54 SST-N1....................................B-55 SST-N1M.................................B-55 SST-N2....................................B-55 SST-N2M.......................
Appendices Page 6120-24...................................B-36 6125-08...................................B-37 6125-12...................................B-37 6125-16...................................B-37 6125-20...................................B-37 6125-24...................................B-37 6130-08...................................B-36 6130-12...................................B-36 6130-16...................................B-36 6130-20...................................B-36 6130-24..................
Glossary of Terms Appendices Air Inclusion: The ambient atmosphere forced into the system during the connection of the quick disconnect halves. Pressure Impulse Test: Subjecting a component to a specified pressure at a specified rate of increase or decrease for a specified time limit. Break-Away: Automatic disconnection of a coupling when an axial separation force is applied. Pressure Operating: The pressure at which a system is operated.
Offer of Sale Appendices The items described in this document are hereby offered for sale at prices to be established by Parker Hannifin Corporation, its subsidiaries and its authorized distributors. This offer and its acceptance by any customer (“Buyer”) shall be governed by all of the following Terms and Conditions.
Parker Hannifin Corporation 6035 Parkland Blvd. Cleveland, Ohio 44124-4141 Telephone: (216) 896-3000 Fax: (216) 896-4000 www.parker.com About Parker Hannifin Corporation Parker Hannifin is a leading global motion-control company dedicated to delivering premier customer service. A Fortune 500 corporation listed on the New York Stock Exchange (PH), our components and systems comprise over 1,400 product lines that control motion in some 1,000 industrial and aerospace markets.
Fluid Connectors Group Sales Offices Parker Hannifin Corporation Quick Coupling Division 8145 Lewis Road Minneapolis, MN 55427 (763) 525-4240 FAX (763) 544-3418 Parker Hannifin Rak S.A. Quick Coupling Division 17, rue des Buchillons Z.I. du Mont-Blanc B.P. 524 74112 Annemasse Cedex France Tel.