Instructions / Assembly

Roller Buckle
Safety Data Sheet
MSDS Number: FAS-09
Revision Date: 3-23-16
Page 3 of 5
Nickel CAS no.: 7440-02-0 8 h.: 0,05 mg/m3 2007
EC no.: 231-111-4
EXPOSURE CONTROLS
Recommended Monitoring Procedures: Special health control must be carried out.
Measuring of: Dust and metals in air. Results ought to be lower than TLV.
Occupational Exposure Controls: Provide sufcient ventilation for operations causing dust
formation.
Respiratory Protection: Use respiratory equipment with particle lter, type P3.
Hand Protection: Use suitable protective gloves if risk of skin contact. PVC gloves are
recommended. Break-through time > 8 hours. Use thin cotton gloves inside the rubber
gloves if allergy risk.
Eye Protection: Use tight tting goggles if dust is generated.
Other Information: When using do not eat, drink or smoke. Wash at the end of each work
shift and before eating, smoking and using the toilet. Change work clothing daily before
leaving work place. Isolate contaminated clothing and wash before reuse.
9. PHYSICAL AND CHEMICAL PROPERTIES
Odor: No characteristic odor.
Color: Silver Grey
Specic Gravity: Value: 8,9 g/ml
Comments: 20 C
Melting Point/Melting Range: Value: 1453 °C
Boiling Point: Value: 2700 °C
Comments: 760 mmHg
OTHER PHYSICAL AND CHEMICAL PROPERTIES
Comments: Molecular weight: 58,69
10. STABILITY AND REACTIVITY
Materials To Avoid: Strong acids.
Hazardous Decomposition Products: Explosive gases/vapours/fumes of: Hydrogen.
Stability: Stable under the prescribed storage conditions.
11. TOXICOLOGICAL INFORMATION
Toxicological Information:
LD50 oral Value: > 9000 mg/kg