Instructions / Assembly

Stainless Steel Safety Wire
Safety Data Sheet
MSDS Number: SSLW304-SP
Revision Date: 5-25-16
Page 3 of 6
8. EXPOSURE CONTROLS/PERSONAL PROTECTION
Exposure Limits: OSHA/PEL: ACGIH/TLV:
Iron No exposure limit established No exposure limit established
Chromium 1 mg/m3 0.5 mg/m3
Nickel 1 mg/m3 1.5 mg/m3
Tungsten 5 mg/m3 5 mg/m3
Molybdenum 15 mg/m3
(insoluble compounds, total dust)
10 mg/m3
(insoluble compounds, inhalable)
Manganese 5 mg/m3 0.2 mg/m3
Silicon 5 mg/m3 5 mg/m3 (respirable)
Engineering Controls: Ensure adequate ventilation to maintain exposures below
occupational limits. Whenever possible the use of local exhaust ventilation or other
engineering controls is the preferred method of controlling exposure to airborne dust and
fume to meet established occupational exposure limits. Use good housekeeping and
sanitation practices. Do not use tobacco or food in work area. Wash thoroughly before
eating or smoking. Do not blow dust off clothing or skin with compressed air.
Respiratory Protection: If permissible levels are exceeded, use NIOSH approved dust
respirator.
Eye Protection: Safety glasses
Skin Protection: Not normally needed. Wear impermeable gloves, protective work
clothing as necessary.
9. PHYSICAL AND CHEMICAL PROPERTIES
Appearance:
Form: Solid in various forms
Color: Silver-gray metallic
Odor: Odorless
Odor Threshold: Not determined
pH: N/A
Melting Point: 743°F - 790° (1370°C - 1455°C)
Boiling Point: No data
Flash Point: N/A
Evaporation Rate: N/A
Flammability: No data
Upper Flammable Limit: No data
Lower Flammable Limit: No data
Vapor Pressure: No data
Vapor Density: N/A