Instructions / Assembly
White Nomex Thread
Safety Data Sheet
MSDS Number: THRD-01-SP
Revision Date: 5-25-16
Page 2 of 6
4. FIRST AID MEASURES
General advice: No hazards, which require special rst aid measures. If symptoms persist,
call a physician. If irritation occurs, ush area thoroughly with water.
5. FIRE FIGHTING MEASURES
Flammable Properties
Flash point: not applicable
Thermal decomposition: > 300 °C (> 572 °F)
Fire and Explosion Hazard: Hazardous decomposition products formed under re
conditions.
Extinguishing Media: Use extinguishing measures that are appropriate to local
circumstances and the surrounding environment.
Fireghting Instructions: Wear self contained breathing apparatus for re ghting if
necessary.
6. ACCIDENTAL RELEASE MEASURES
NOTE: Review FIRE FIGHTING MEASURES and HANDLING (PERSONNEL) sections before
proceeding with clean-up. Use appropriate PERSONAL PROTECTIVE EQUIPMENT during
clean-up.
Safeguards (Personnel): None.
Spill Cleanup: Avoid dust formation. Clean up dusts and bres with high efciency
particulate air (HEPA) ltered vacuum equipment, or by wet cleaning.
Accidental Release Measures: Do not let product enter drains.
7. HANDLING AND STORAGE
Handling (Personnel): Avoid dust formation. Do not touch moving threadlines.
Entanglement with this bre can severely cut or even sever ngers. Avoid breathing dust
or vapor.
Storage: Keep away from direct sunlight.
8. EXPOSURE CONTROLS/PERSONAL PROTECTION
Engineering controls: Ensure adequate ventilation. Recirculated air should be ltered to
remove respirable dust. Provide for appropriate exhaust ventilation and dust collection at
machinery. Static charges can cause explosions in solvent and dust laden atmospheres.