User's Manual

2. Charge with a 2A mobile phone charger with a standard USB interface.
3. In the charging state, the red light is always on, and the green
light is on when the battery is fully charged.
Audio On:
Press and hold the key to ON to turn on the power. The blue light is on,
the blue light is flashing, and there is a mode sound. The power is
turned on successfully.
Audio Off:
Press and hold the key to OFF to turn off the power, the indicator light
is off, there is a mode sound, and the shutdown is successful.
Audio cable connection:
Plug one end of the Ф3.5mm audio cable that is included with the
Bluetooth audio into the AUX connector, and plug the other end into the
computer's headphone jack (also connected to the phone, PAD, MP3, etc.)
to play music. Adjust the volume in the playback device and enjoy a
wonderful music tour.
Tip: When the battery is low, the Bluetooth speaker will emit a low
battery alarm (red light), please charge it in time. If it fails to
charge in time, it will automatically enter the low power protection
state and shut down.
Audio Bluetooth wireless connection playback:
1. After turning on the power, the blue light will be on, the blue light
will flash, and the “Enter Bluetooth Mode” sound will be displayed,
indicating that the Bluetooth sound is in the wireless discoverable