User`s manual

User's Manual

• LOOP THROUGH OUT : LOOP THROUGH OUTPUT port of 1~16 channels. (DSUB-25 male Connector)

(Option)

• AUX/ALARM/SENSOR : AUX OUT device, Alarm device, Sensor connection port. (DSUB-25 male

Connector)

4. AUDIO / VGA

• AUDIO : On top of existing 4 Audio inputs, additional Audio input pins are supported for 8 and 16 channel

DVR. (Optional)

• VGA : This port exports the same video output signal under VGA signal standard.

5. AUDIO IN/OUT

• IN : Audio Line Input port.

• OUT : Audio Line Output port.

6. VIDEO IN/OUT

• CAMERA : Camera input port. Input signal is CVBS.

• VIDEO OUT : VIDEO OUTPUT Port. CVBS signal is coming out. Spot port is supported when the spot

board is built-in (Optional). When there's no built-in spot board, it's same as video output signal. Spot output

selection jumper J30 should be set as J30 : 1-2(VIDEO OUT), 2-3 (SPOT).

7. DC 12V

• DVR power supply port. (DC12V/3.5A)

6. Basic Operation

6.1. Power ON/OFF

• Power ON : When connecting power cable, power LED light on front panel of DVR turns to red color and this

means that the DVR is on stand-by mode and ready for power on. At this moment, when pressing power key

button on front DVR, power LED light turns into green color, showing the DVR power is actually on. When

DVR booting process is completed, OSD (On Screen Display) menu is displayed on screen. At the same time,

you can hear the buzzer sound, alerting that DVR booting process is completed. But OSD menu with ON setting

features only will be displayed. Once the OSD menu is displayed on the screen, it means the DVR booting

process is normal. Now the user can manipulate the DVR at his convenience.

• Power OFF : When powering off the DVR system, please press the power key button on front panel of DVR.

Then you will see the password input dialog box pop up for your password input (Default : 111111) to turn

off the DVR system. Afterward the power LED display on front panel of DVR becomes red color, showing

stand-by mode.

6.2. Date Time Setup

This is to input the date time of DVR system. After changing the date time of DVR, you must press OK key button

on date time menu to activate the date time application. (System Menu > Date/Time Setup)

6.3. Password Setup

This is to change the password of DVR system. Password configuration can be made with 4 to 8 digit alpha-

numeric combination. (System Menu > System Password Setup)