User`s manual

User's Manual

4. Button for Recording Playback

• RECORD : This key button initiates the forced recording except the continuous recording mode. Pressing this

key button makes all live video channels start recording and pressing it one more time stops the recording.

• R.PLAY (Reversed Play) : This is to initiate the reversed playback during forward playback. On PTZ control

mode, this key button is to be used to lower the controlling speed.

• STOP : This key button allows you to stop the playback.

• PLAY : This is a playback start button and it initiates the playback of pre-selected channel, starting file, and/

or audio when it's pressed during live mode. On live mode PAUSE status, this button resumes the playback.

In case of PTZ controlling mode, it can be used to increase the controlling speed. On still image viewing

menu, it is also being used for image back up.

• PAUSE : This key button freezes the playback mode until it's pressed again.

5. IR Reception : This is to accept the IR data from the remote controller.

6. LED Display

• POWER : It shows red light on when the system is on stand-by mode and green light on when the system

is in operation mode.

• REC : Green light flickering on recording mode.

7. Front USB port : This USB port is to be used to back up the video data, or captured still image from HDD. Also

this USB port supports USB mouse controlling for easy DVR operation with front input location advantage.

5. Rear Panel Fucntions

Figure 2. 16CH DVR Rear panel

Figure 3. 8CH DVR Rear panel

1. ETHERNET

• 10/100 Base-T network connection port (RJ-45).

2. RS-485

• RS-485 A port : RS-485 port to connect PTZ devices.

3. EXTENSION PORT