User`s manual

User's Manual

• PTZ(Pan/Tilt/Zoom) : This key button allows you to enter Pan/Tilt/Zoom/Focus mode. Pressing this key

button one more time lets you go back to previous live display mode.

• MENU : This is to initiate the System Configuration Menu. If you are already in progress of several steps

of menu control, this key lets you go back to previous upper menu.

• MULTI

• 16CH DVR

• LIVE : The user can utilize this key to set split channels from 1 to 16. It shows 16, 4, 8 and 9 split

channel display in sequential order. By using direct channel selection button, the user can select the

specific 1 channel and then go back to basic 16 split channel by pressing MULTI key button.

• PLAYBACK : The user can utilize this key to play the channels from 1 to 16. It shows 16, 4, 8 and 9

split channel display in sequential order. By using direct channel selection button, the user can select

the specific 1 channel and then go back to basic 16 split channel by pressing MULTI key button.

• 8CH DVR

• LIVE : The user can utilize this key to set split channels from 1 to 8. It shows 8, 9, 4 and 6 split channel

display in sequential order. By using direct channel selection button, the user can select the specific 1

channel and then go back to basic split channel by pressing MULTI key button.

• PLAYBACK : The user can utilize this key to play the channels from 1 to 8. It shows 9 and 4 split

channel display in sequential order. By using direct channel selection button, the user can select the

specific 1 channel and then go back to basic 16 split channel by pressing MULTI key button.

• SEQ

• 16CH DVR : This is to see all channels in sequential order where the video input data is detected on live

mode. By pressing SEQ button one time, individual channel is to be displayed one by one. Pressing it one

more time shows 4, 8, 9, and 16 split channel in order. Also this key button is used to release all area set

from motion detection area setup menu.

• 8CH DVR : This is to see all channels in sequential order where the video input data is detected on live

mode. By pressing SEQ button one time, individual channel is to be displayed one by one. Pressing it one

more time shows 4, 6, 8, and 9 split channel in order. Also this key button is used to release all area set

from motion detection area setup menu.

3. Direction selection button

• UP : On menu status, this key button can be used to select the detailed item by moving the cursor upward.

On PTZ controlling status, this key button can be used to move the camera upward, or to near the focus. On

playback mode, this key allows you to switch the channel.

• DOWN : On menu status, this key button can be used to select the detailed item by moving the cursor

downward. On PTZ controlling status, this key button can be used to move the camera downward, or to make

the focus far away. On playback mode, this key allows you to switch the channel.

• LEFT : On menu status, this key button can be used to change the setting value. On PTZ controlling status,

this key button can be used to move the camera left direction, or to make the Zoom wide. On playback mode,

this key allows you to lower the plaback speed.

• RIGHT : On menu status, this key button can be used to change the setting value. On PTZ controlling status,

this key button can be used to move the camera right direction, or to make the Zoom Tele. On playback

mode, this key allows you to increase the plaback speed.

• OK : On menu status, this key is being used to confirm and execute the selected function and on PTZ

controlling mode, it's being used to switch Pan/Tilt mode and Zoom/Focus mode.