Technical data

EV3000-D manual
Equipment described herein may require US Government authorization for export purposes. Diversion contrary to US law
is prohibited. ©2008 United Vision solutions, Co., Specifications are subject to change. Check website:
www.unitedvisionsolutions.com
uG
Command Byte1 Byte2 Byte3 Byte4 Byte5 Byte6 Byte7
25 Turn on
Wiper at
Camera
2
Command FFh Receiver
ID
00h
09h
00h
0Bh
Checksum
EV3000-D
Response
uG
Description Receiver ID=00h~FEh, 0Bh of Byte 6=Wiper of Camera 2. Camera 2
is Thermal Camera (Clear Bit 6 of Byte3 to Select Camera 2 and The
Wiper of Camera 2 Will be Driven for Several Seconds.)
26 Turn off
Wiper at
Camera
2
Command FFh Receiver
ID
00h
0Bh
00h
0Bh
Checksum
EV3000-D
Response
uG
Description Receiver ID=00h~FEh, 0Bh of Byte 6=Wiper of Camera 2.Camera 2
is Thermal Camera(Clear Bit 6 of Byte3 to Select Camera 2 and The
Wiper of Camera 2 Will be stopped.)
27 Toggle
Polarity
Command FFh Receiver
ID
00h
09h
00h
01h
Checksum
EV3000-D
Response
uG
Description Receiver ID=00h~FEh, Camera 2 is Thermal Camera (Clear Bit 6 of
Byte3 to Select Camera 2.)
28 Toggle
auto
span/His
togram
Linear
Command FFh Receiver
ID
00h
09h
00h
02h
Checksum
EV3000-D
Response
uG
Description Receiver ID=00h~FEh, Camera 2 is Thermal Camera (Clear Bit 6 of
Byte3 to Select Camera 2)
29 NUC on
the
internal
shutter
Command FFh Receiver
ID
00h
09h
00h
03h
Checksum
EV3000-D
Response
uG
Description Receiver ID=00h~FEh, Camera 2 is Thermal Camera (Clear Bit 6 of
Byte3 to Select Camera 2.)
30 Menu
selection
one
position
down
Command FFh Receiver
ID
00h
09h
00h
04h
Checksum
EV3000-D
Response
uG
Description Receiver ID=00h~FEh, Camera 2 is Thermal Camera (Clear Bit 6 of
Byte3 to Select Camera 2.)