Technical data

36-pin connection terminals in thermal camera enclosure
(only 33 terminals are used)
a. “D” of 36-pin Terminals means down-side(lower-side) 12 ea of
terminals(Terminal No.1~12).
You can find that Pin No.9 is empty (Not connected) on above Fig 1.
b. “UP” of 36-pin Terminals means up-side(upper-side) 12 ea of
Terminals(Terminal No.13~24).
You can find that Pin No.17 is empty (Not connected) on above Fig 1.
c.”SIGNAL NAME,FUNCTION, & PIN NAME of the above 36-Pin Terminal
Description Table is same as the pin name of 55-pin system cable of thermal
camera manual.
d.”TERMINAL No.”of above 36-Pin Terminal Description Table is same as
Number of above Figure 1.
e.Don’t connect any lead wire to
” TERMINAL No. 18(SVIDEO SHIELD WIRE).
Because thermal Camera has no SVIDEO SHIELD terminal.