Technical data

EV3000-D manual
Equipment described herein may require US Government authorization for export purposes. Diversion contrary to US law
is prohibited. ©2008 United Vision solutions, Co., Specifications are subject to change. Check website:
www.unitedvisionsolutions.com
No Command Byte1 Byte2 Byte3 Byte4 Byte5 Byte6 Byte7
19 Clear
Preset
Command FFh Receiver
ID
00h
05h
00h
P_ID
Checksum
EV3000-D
Response
uG
Description Receiver ID=00h~FEh, P_ID=00~7Fh,The Receiver Clears Current
Pan, Tilt, Zoom, Focus Position of Camera 1 in EEPROM.
20 Goto
Preset
Position
Command FFh Receiver
ID
00h
07h
00h
P_ID
Checksum
EV3000-D
Response
uG
Description Receiver ID=00h~FEh, P_ID=00~7Fh, The Pan, Tilt, Zoom & Focus
Position of Camera 1 Will be Moved to Stored Preset Position.
21 Turn on
Wiper at
Camera
1
Command FFh Receiver
ID
40h
09h
00h
09h
Checksum
EV3000-D
Response
uG
Description Receiver ID=00h~FEh, 09h of Byte 6=Wiper of Camera 1. Camera 1
is DAY/NIGHT Camera with Lens (Set Bit 6 of Byte3 to Select
Camera 1 and The Wiper of Camera 1 Will be Driven for Several
Seconds)
22 Turn off
Wiper at
Camera
1
Command FFh Receiver
ID
40h
0Bh
00h
09h
Checksum
EV3000-D
Response
uG
Description Receiver ID=00h~FEh, 09h of Byte 6=Wiper of Camera 1. Camera 1
is DAY/NIGHT Camera with Lens (Set Bit 6 of Byte3 to Select
Camera 1 and The Wiper of Camera 1 Will be stopped.)
23 Turn on
Pump
Command FFh Receiver
ID
00h
09h
00h
0Ah
Checksum
EV3000-D
Response
uG
Description Receiver ID=00h~FEh, 0Ah of Byte 6=Pump.The Pump Will be
Driven for Several Seconds.
24 Turn off
Pump
Command FFh Receiver
ID
00h
0Bh
00h
0Ah
Checksum
EV3000-D
Response
uG
Description Receiver ID=00h~FEh, 0Ah of Byte 6=Pump. The Pump Will be
stopped.