Technical data

EV3000-D manual
Equipment described herein may require US Government authorization for export purposes. Diversion contrary to US law
is prohibited. ©2008 United Vision solutions, Co., Specifications are subject to change. Check website:
www.unitedvisionsolutions.com
C- Pan/Tilt and Enclosure
Materials Stainless steel 316L
Enclosure Pressurized rugged fill with Dry Nitrogen which
prevents condensation inside the tube
Wiper 24 VAC wipers, one for each enclosure
Washer Pump with 10 ltr water tank
Rotating angle Pan 0°to 360°/ Tilt -90°to +90°±5°
Rotating speed Pan :0.1°~ 6°/sec, Tilt :0.1°~ 3°/sec Max
Motor Step motor (DC 24V/6A, Pan 96W / Tilt 96W)
Power Supply AC 110 / 220 VAC
Temperature -25 to +50
Weight About 70 kg
Preset 000~127(128 Presets)
Interface RS-422
Receiver address 000~254(255 Addresses)
Baud rate Selectable by DIP switch among 2400,4800, &9600
BPS
[Default : 2400BPS]
Protocol PELCO-D (8 Data,1 stop, No parity)
Camera & Lens
Control
1)Thermal camera : Controlled by RS-422
2)Day/night camera : Zoom-in/out, Focus-near/far
AUX Control 1)Two wipers
(Thermal camera and Day/night camera side)
2)One Pump
Video 1)Thermal camera : BNC & SVIDEO (4Pin din
connector)
2)Day/night camera : BNC
ࣜ