User's Manual

56
S After the Contro l has connected to the network , go to
www.MyInfinityTouch.Carrier.com to register the unit and begin remote
access. This requires the MAC address and serial number of the Infinity
System Control. To find the serial number and MAC address of the
Infinity System Control, click o n Menu, Down Arrow, Wirele ss and
View MyInfinity Info. This screen will provide the information needed
on the MyInfinity website during registration.
S When the connection to the MyInfinity web server has been established,
the status screen will show Connected for both Wi--Fi and the server.
A13242C
To establish Wi -- Fi connectivity to the Infinity System Control through the Infinity
System Wireless Access Point (TP--LINKR Device), connect the WAN (BLUE
port) connection of TP--LINK Wireless Access Point to the home’s existing router
LAN port using the provided Ethernet cable. The LAN ports on the back of the
TP--LINK Wireless Access Point should not be used for other devices. The Infinity
(TP --LINK) Wireless Access Point should only be used for connection of the
Infinity System Control(s) and is not intended to be used wired or wirelessly with
any other devices.