User's Manual

MAIN SCREEN

The Main Screen is where most interactions will take place. Touch anywhere on the

Home screen to arrive at the Main Screen.

System Mode

Once in the Main Screen,

S To access your system mode touch the MODE label located in the upper

right of the Control.

S The drop--down menu will allow you to choose between AUTO, HEAT,

COOL, FAN ONLY and OFF, depending on the equipment installed in

your system.

S If OFF is selected your system will not Control temperatures, humidity,

or fan.

S If AUTO is selected, the Infinity System Control automatically switches

between heating and cooling to maintain your comfort during transition-

al seasons.

NOTE: AUTO mode is intended to switch between heating and cooling modes

based on temperature demand. A gradual auto transition is the energy--conscious

default that will satisfy the majority of customers. Some customers might have

significant and simultaneous heating and coolin g demands in different zones. To

address this need, a special simultaneous heating and cooling demand auto mode

could be enabled by the Installer. When the feature is enabled and AUTO mode is

selected, the simultaneous heating and cooling demand auto mode will alternate

between heating and cooling, depending on d emand, every half hour. This may

result in higher energy usage but provide the benefit of greater comfort. Your

installing contractor is able to enable this feature, if desired. (This feature is only

available with zoned systems).