Manualshelf

Installation Manual

ManualsBrandsUnited Technologies Electronic Controls ManualsElectronicsCarrier Infinity System Control
31323334353637383940
31
could be enabled by the Installer. The simultaneous heating and cooling demand
auto mode will result in higher energy usage but benefit the customer with greater
comfort.
A160183
6.3.1.2. Heat/Cool Deadband
The minimum difference enforced between heating and cooling desired
temperatures. The deadband does not change when the user changes between
Fahrenheit (_F) and Celsius (_C). Ex: A 2_ deadband will be 2_For2_Canddoes
not change with units, _Fand_C. This can allow one setting to “push” the other to
maintain this difference. When the correct deadband is set, touch SAVE.
S Deadband: Adjustable from 0 to 6_
d Default = 2_