Operating instructions

- 3 -
Technical data
Mains voltage: 220-240 V
~
50 Hz
Nominal current: 1,8 A
Rated output: 380 W
Protection class: II
Collector container: 21 liters
Cutting process
for Paper: Crosscut, 4x18 mm particles
Safety Level 3
Working width: 223 mm
Overheating Protection
This appliance is fitted with overheating protection.
Should the motor become too hot due to excessive
loading, the appliance switches itself off automati-
cally. In this case, disconnect the plug from the
mains power socket and wait until the appliance
has cooled down to room temperature. You can
then reconnect the plug to the mains power socket
and continue using the appliance. We recommend
that, after 3 minutes continuous use, you allow the
appliance to cool down for about 30 minutes.
Items supplied
Document Shredder
Operating Instructions
Appliance description
q
Cutter attachment
w
Switch
e
Cutter opening for CD/Credit cards
r
Cutter opening for paper
t
Large waste receptacle (Paper)
y
Power cable
u
Small waste receptacle (transparent) /
Viewing window
Commissioning
 Note: As every paper shredder is tested for
functionality after manufacture, it may happen
that some paper shreds remain in the cutting
blades.
• First of all, place the cutter attachment
q
onto
the large waste receptacle
t
so that the power
cable
y
is located at the rear, i.e. on the closed
side.
• Connect the paper shredder to a power socket.
Operation
Switching the appliance on:
• Place the switch
w
to the position for
shredding.
Inserting paper:
• Insert paper from above and in portrait format
into the cutter opening for paper
r
.
The motor starts automatically and switches itself off
automatically if no further paper is inserted. You
can shred up to 7 sheets (80g/m
2
paper) at the
same time.
 Note: Regularly remove any residue in the cut-
ting blades with a suitable object, for example,
with forceps. Ensure that the power plug is dis-
connected.
IB_67172_UAV380A1_LB6 26.05.2011 14:13 Uhr Seite 3