Specifications

16
f. Plug the cable back into the board and re-attach the DISPLAY with the bottom piece.
g. The controller will have to be fully re-programmed.
Battery compartment.
Fig 6 DISPLAY showing battery compartment.
SPECIFICATIONS
Temperature Range 45° F / 90° F (16° C / 31° C)
Accuracy +/- 2° F
Differential Smart Sensing
System 2 Heat / 2 Cool
Fan Control Auto / On (1 Speed)
Ambient Storage Temp. -20° F to 135° F
Input Voltage 24 VAC (22 to 28 VAC)
Humidity Set 20 to 95%
Humidity Dead Band 1 to 6%
Humidity Differential 1 to 4%
Alarms (6): Loss of Air Flow, Drain Pan Overflow, Hi / Low Pressure,
Dirty Air Filter, Check Heater, (1) Open for Options
Compressor Time Delay 3 Minutes
Display °F or °C
Programmable 5-1-1
Periods / Day 4
Backup Battery
CUSTOMER SERVICE
Any questions on the MP CONTROLLER should be directed to the company that supplied the unit.