Specifications

15
Table 1a Weekly Schedule
Program No. Time Temp
Hour Minutes Heat Cool Humidity
1
2
3
4
Table 1b Saturday Schedule
Program No. Time Temp
Hour Minutes Heat Cool Humidity
1
2
3
4
Table 1c Sunday Schedule:
Program No. Time Temp
Hour Minutes Heat Cool Humidity
1
2
3
4
CARE AND MAINTENANCE
General Care
To keep the MP CONTROLLER working and looking good, follow these guidelines:
 Avoid any liquid spill on the display or the sensor.
 The display or the sensor should not be exposed to direct sunlight or moisture.
 Never use a strong cleaning agent or abrasive powder, as this can damage the finish.
 Ensure that only qualified personnel do repair work on the unit, even if the repairs do not involve
the MP CONTROLLER
Battery Care
The DISPLAY has a 3V lithium battery. The procedure for battery replacement is as follows:
a. When the LCD displays BATT, the battery needs replacement.
b. Open the DISPLAY cover.
c. Unplug the DISPLAY ribbon cable from the bottom piece attached to the wall.
d. Slightly push the battery against the end spring like support, and then use a straight
screwdriver to pop up the battery from the hook.
e. Replace with a new battery of the same type.