User`s manual

Chapter 5 Advanced Settings

Performing a Clean Boot

A clean boot, similar to cold boot, cuts off power of your device, erasing all records

and entries, deleting all programs you have added, cleaning storage memory, and

restoring the device to default factory settings.

When you perform a clean boot, the date and time settings are not be retained. For-

mats, preferences, and other setting are restored to their default factory settings. Data

stored in the flash storage are retained.

NOTE: Never perform a hard reset unless a soft reset does not correct your

problem. When you perform your next ActiveSync operation, you can

restore any data that you previously synchronized to your computer or

you can restore data that you backed up to a storage card.

Follow these instructions to perform a clean boot.

1. Press and hold the Func key and Back-

space key.

2. While holding the Func key and Back-

space key, insert the tip of the stylus

into the reset hold on the back of the

PA600 II. Press and hold the reset but-

ton until you see the unitech splash

logo screen. Wait 5 seconds and then

release the Func key and Backspace

keys.

NOTE: The system is returned to the default settings. All registry settings and all

files (include the hidden files) are returned to their original factory

defaults. And this will clean up storage memory.

FUNC

ESC ghi jkl mno

wxyz

ENTER

TAB

tuvpqrs

key

abc Rs def

ALPHA