User`s manual

Chapter 5 Advanced Settings

The Power screen appears.

2. The battery menu item displays the status of

the main and backup batteries.

On the screen shown here, both batteries are

Good.

NOTE: It is necessary to charge the battery

when the battery charge reaches

below 10%. If the battery does not

accept a charge, contact unitech

Technical Support.

Extending Battery Life

You can extend the PA600 II battery life by doing either of the following:

• Change the automatic power settings

• Minimize the use of backlight

Changing the Automatic Power Settings

The PA600 II will enter idle mode when there is no task, or all tasks are waiting for

input. In default setting, the PA600 II automatically turns itself off if it remains idle for 3

minutes and when there is no external charging power connected. Pressing the power

button returns the PA600 II to the same point at the time of automatic shutdown.

To change the automatic power settings:

1. In the Power screen tap the Advanced tag.

2. Tap the automatic shut off time arrow to

select from a list of time periods. The avail-

able time periods are 1, 2, 3, 4, and 5 min-

utes.

3. This function can also be activated when the

PA600 II is plugged into the power adapter

or placed in its docking station by tapping

the On external power check box and then

tapping the arrow to select from a list of time

periods. The available time periods are 1, 2,

5, 10, 15, and 30 minutes.