User`s manual

Chapter 3 Getting Connected

Synchronizing with Your Computer

Synchronization takes place according to the options you choose while setting up

ActiveSync on your computer. If you accept the default (On Connect) synchronization

option in the Microsoft ActiveSync Setup Wizard, you’ll be able to simply connect your

PA600 II to your desktop computer and synchronization will take place.

If you have not enabled the On Connect feature in Active Sync, you can start Active-

Sync in either of the following ways:

• On your computer, double-click My Computer → Mobile Devices folder.

• Connect the USB cable between the computer and PA600 II.

Connection options

You can set remote synchronization with your computer using the following connec-

tion options:

• USB connection

• Bluetooth connection

• GPRS Connection

• WiFi connection

USB Connection

To synchronize with your computer using a USB connection:

1. Connect your device to your computer using the USB charging cable.

2. Initiate connection by tapping Start → Pro-

grams → ActiveSync.

3. Tap Menu → Connections.

4. Select Synchronize all PCs using this con-

nection check box.

5. Select a baud rate or cable type connection.

6. Tap OK.

Bluetooth Connection

Your device is equipped with Bluetooth wireless technology that you can use to syn-

chronize information with a computer equipped with a Bluetooth adapter or access

point. Bluetooth wireless technology allows you to communicate with the computer

whenever it is within range.

Follow these instructions to set up a Bluetooth connection.