User`s manual

Chapter 2 Using the Hardware
19
3. To test the barcode scanner, tap the Test
tab.
4. Tap Tools
5. Tap Enable Scan
6. To perform auto scan, Tap Tools → Auto
Scan → Start Auto- Scan
7. Choose Interval: 3 secs
8. Tap: Start
9. Laser scans every 3 seconds and barcode
is scanned automatically.
10. Tap Tools → Auto-Scan → Stop Auto-
Scan.
Using the SIM Card
The PA600 II has a slot for GPRS SIM card. It is placed inside the battery compart-
ment.
Inserting the SIM Card
1. Take out the battery cover and the main battery. Insert the SIM card with the
notched corner as shown in the picture below.
NOTE: The chip of the SIM card should face upwards.
2. Push the SIM card to the end until you hear a click. Push the lock to the right to
lock the card by stylus.