User`s manual

Chapter 2 Using the Hardware
16
Copyright 2008 unitech Electronics Co., Ltd. All rights reserved. unitech is a registered trademark of unitech Electronics Co., Ltd.
Adjusting the Screen Brightness
Adjust the screen brightness by pressing
the Function button to enable the soft
keys and pressing the 7 (decrease bright-
ness) or 9 (increase brightness) buttons.
Using the Stylus
CAUTION! Never use anything other than the PA600 II stylus on the screen. Oth-
erwise this could cause a permanent damage.
1. Remove the stylus from its holder.
2. Hold the stylus as you hold a pencil.
3. To make a choice from a menu, lightly tap the tip of the stylus on that choice.
4. To write data into a field on a form, use the stylus to print the letters or numbers.
Use very light pressure.
FUNC
Ls
ESC ghi jkl mno
wxyz
ENTER
TAB
tuvpqrs
key
OK
abc Rs def
ALPHA
1
4
7
2
5
8
0
3
6
9
.
Function
Button
Increase
Brightness
Decrease
Brightness