User`s manual

Use the stylus to select letters, numbers, or symbols from the Soft Input Panel for the current
application（see Figure 2-5）.
Other Character Support from WinCE Keyboard
In addition to standard keyboard input, the
HT650 supports special European character
and symbol input. To enter these characters,
tap the [áü] key on the touch screen keyboard
to display the available characters.
Bar Code Scanner
The HT650 has an integrated 1D laser bar code scanner (depending on model number) capable
of reading all major bar code labels.
To use the scanning function, complete the following steps:
1. Press the scan key. The scanner scans as long as you hold the key or for few seconds.
2. Upon reading a barcode, the red LED indicator comes on until the trigger is release or few
seconds. The green LED and the beep tone indicate a good read.
3. Aim the scanning beam at the center of barcode.
4. Barcode Scanning Position
This device can read from 40mm to 300mm distance.
a) Position the laser scanner close to the barcode when scanning small barcodes. And
position it is a distance from the barcode when scanning large barcodes.
b) The reader can be detected by a red beam.
16