User`s manual

Starting the HT650
Pressing the Power ON/OFF Key
Press the Power/Backlight key briefly. The Unitech HT650 welcome screen appears. The
Windows CE screen will appear shortly thereafter. If the Handy Terminal does not power on,
please perform the cold boot.
Caution：
When a battery is fully inserted in Handy Terminal for the
first time, upon the Handy Terminal’s first power up, the
device boots and powers on automatically.
As the Handy Terminal initializes its File system, the Terminal splash screen displays for about 30
seconds. To turn off the Handy Terminal, just press the Power/Backlight key again. This action does
not actually turn off the Handy Terminal, it only turn the Handy Terminal into suspend mode. All
running applications remain as you left them, until you press the Power key again to resume
operation of the Handy Terminal.
Using the Stylus
The stylus function like a mouse, hold the stylus like a pen or pencil. You can do action as
follow.
 Double Tap: Touch the icon twice on the screen to open or execute it.
 Drag：Firmly press the icon on the screen to drag across the screen.
Caution：
Never use an actual pen, pencil, or sharp/ abrasive object to write
on the touch screen.
Do not apply unnecessary high pressures on the screen.
Calibrating the touch Screen
On the initial boot-up of the Handy Terminal, the stylus calibration screen (Labeled Align Screen)
opens. Use the stylus to press and hold briefly on the center of each target as it moves around the
screen.
If necessary, adjust the backlight on the Handy Terminal to make the screen readable.
When you feel the touch screen function is poor or the operation does not match the exact location
it should be, please recalibrate the screen by using the stylus to tap the Start  Settings  Control
Panel  Stylus, to open the “Calibration” to recalibrate again.
11