User`s manual

30
Copyright 2007 unitech Electronics Co., Ltd. All rights reserved. unitech is a registered trademark of unitech Electronics Co., Ltd.
Encryption:
1.

To setup the encryption, scroll down the encryption list
and select the encryption type in your network.
2. Tap "WEP keys/PSK's"
3. Enter the WEP keys and tap "OK".
Commit and Activate
1.

Tap "Commit" to activate the setting.
2.

In "Main" tab, select the prole you want to activate.
3.

In "Status" tab, you can see the IP address and the
signal strength.