User`s manual

26
Copyright 2007 unitech Electronics Co., Ltd. All rights reserved. unitech is a registered trademark of unitech Electronics Co., Ltd.
Specifying an IP Address
If there is no DHCP server in your LAN environment,
assign IP addresses to each RH767 as follows:
1. Tap Start → Settings → Control Panel and then
double-tap Network and Dial-up Connections.
2. Tap the BCMCF1 icon next to Specify IP Address.
3. Input the proper IP address, Subnet Mask, and
Default Gateway.
4. Tap the Name Servers tab, and then input the
proper Primary DNS, Secondary DNS, Primary
WINS, and Secondary WINS.
To avoid conflict with your LAN environment,
consult with your MIS department for the correct
TCP/IP setting.