User`s manual

18
Copyright 2007 unitech Electronics Co., Ltd. All rights reserved. unitech is a registered trademark of unitech Electronics Co., Ltd.
2. The Scanner Control Panel opens.
From here you can con figu re b arco de
scanner parameters such as enabling or
disabling barcode symbologies, setting data
transmission options, conguring magnetic and
proximity reading options, and setting power
management options.
3. To test the barcode scanner, tap the Test tab
and press one of the scanner buttons on a
barcode. The screen will display the results of
the scan.
Scanner Settings
When it is necessary for the user to change
the default barcode symbology for a different
application, the Scanner Control Panel provides the
ability to change default symbology, place delimiter
characters behind scanned data, and save the
settings.
Press [FUNC] + 7 to display the Scanner Control
Panel.
NOTE:
Alternatively, tap Start → Settings →
System → Scanner Settings to display
the Scanner Control Panel.