Service manual

Unitech Electronics Co., Ltd Created
by Yukiko
PA970
Operation
Manual
V1.1 Page 121 of 121
2. Check “Enable character repeat”.
3. Adjust the repeat delay and repeat rate.
4. Place the cursor in the field of “Tap here and hold down a key to test”.
5. Press and hold a key on the keypad.
6. You should see the character is repeated until you release the key.
4.10 Network and Dial-up Connection
Path: Start/Settings/Control Panels/Network and Dial-up connection
This setting is to configure the network setting and Dial-up connection.
1. Double tap “Network and Dial-up connection”.