User`s manual

Chapter 3 Getting Connected

Connecting the PA968 to a Computer

1. After Microsoft ActiveSync is

installed, connect the PA968

to the PC as described in

Connecting the terminal to a

host (PC/Notebook) on page

2. Start the PA968.

3. Microsoft ActiveSync starts

automatically and config-

ures the USB Port to work

with the PA968. The New

Partnership setup wizard

automatically starts.

NOTE: If Microsoft ActiveSync doesn’t start automatically, click Start → Pro-

grams → Microsoft ActiveSync.

NOTE: If a message appears indicating that it is unable to detect a connection,

click Cancel and manually configure the communication settings. Manu-

ally configure the communications settings on the PC by clicking MAS

→ File → Connection Setting → Connect Device.

4. Follow the onscreen instructions.

5. When the configuration pro-

cess is complete, the Micro-

soft ActiveSync window

appears.

6. Synchronization will initiate, and it will synchronize periodically or upon connec-

tion.

NOTE: A PC can partner with multiple PA968’s. But, a PA968 can only partner

with up to two computers.