User`s manual
Chapter 2 Using the Hardware
16
Copyright 2009 unitech Electronics Co., Ltd. All rights reserved. unitech is a registered trademark of unitech Electronics Co., Ltd.
Using the SD/MMC Memory Card
The PA968’s expansion slot is compatible with a range of SD and MMC storage cards,
which are primarily used to backup or transfer files and data. The expansion slot also
supports SDIO cards for additional connectivity options.
Inserting a Storage Card
1. Remove the SD Compartment Cover by
rotating the screws counterclockwise with
a screwdriver.
2. Insert the SD Card with the notched end
facing up and into the slot as shown in the
illustration to the right.
3. Push the SD Card into the slot until it clicks into place.
4. Rotate the screws clockwise with a screwdriver to securely close the SD Com-
partment Cover.
Removing a Storage Card
1. Remove the SD Compartment Cover by rotating the screws counterclockwise
with a screwdriver.
2. Press the card in, and release. The card pops out.
3. Remove the card from the slot.