User`s manual

Chapter 1 Getting Started
11
Copyright 2009 unitech Electronics Co., Ltd. All rights reserved. unitech is a registered trademark of unitech Electronics Co., Ltd.
Calibrating the screen
The calibration screen automatically appears when the PA968 powers on for the first
time or after the system is reset.
Calibrate the screen at any time through the following:
1. Tap Start → Settings → Control Panel.
2. Double-tap Stylus.
The Stylus Properties window appears.
3. Tap the Calibration tab. Tap Recalibrate to cal-
ibrate the screen.
The alignment screen appears.
NOTE: Or simultaneously press FUNC and ESC
to access the calibration screen.
4. Tap the target mark firmly and accurately.
A
B