User`s manual

Chapter 1 Getting Started

Charging the Battery

Charge the PA968 for at least 16 hours before initial use. After the initial charge, the

PA968 will recharge to full capacity in 4 hours. Charge the PA968 with the USB

Charging Cable or the Docking Station.

CAUTION! Operating the PA968 for the first time without the AC Adapter, and

without fully charging the Backup Battery may result in RAM memory

data loss. When the Main Battery is removed, the Backup Battery

retains RAM data for 8 hours. Charge the battery within this time

period to avoid data loss.

NOTE: Turn the Backup Battery switch to the ON position before charging the

Battery. Data loss may occur if the Backup Battery is not properly

charged.

Charging the battery with the USB charging cable

1. Press and hold the USB Charging Cable’s Release Buttons while connecting to

the PA968 (1).

2. Plug the AC Adapter Cable into the USB Charging Cable’s power jack (2).

3. Plug the other end of the AC Adapter Cable into an electrical outlet (3).

Charging the battery with the cradle

1. Plug the AC Adapter Cable into the Cradle’s power jack (1).

2. Plug the other end of the AC Adapter Cable into an electrical outlet (2).