User`s manual

Chapter 1 Getting Started

Setting up the PA968

Install and charge the battery, check the battery status, turn on the PA968, and cali-

brate the screen through the following:

Installing the Battery

WARNING! If the Battery Pack is handled improperly there is a risk of fire and/or

burns. DO NOT disassemble, crush, puncture, short external con-

tacts, or dispose the battery pack in fire or water. DO NOT attempt to

open or service the battery pack. Dispose of used batteries according

to local recycling guidelines.

A Backup Battery cell is embedded in the PA968 to prevent data loss when the remov-

able Battery Pack disconnects from the PA968. The Backup Battery will maintain data

and system settings for up to 8 hours.

NOTE: Initially charge the PA968 for at least 16 hours to enable the internal

Backup Battery cell with enough power to support the PA968.

NOTE: Properly replace the Battery Compartment Cover after installing the

Main Battery.

1. Open the Battery Compartment Cover by sliding the Battery Compartment Tabs

and lift the Battery Compartment Cover up in the as direction shown below:

2. Turn the Backup Battery Switch to the left in the ON position as shown below:

Battery Compartment Tab

Backup Batter

Switch