User`s manual

The Power screen appears.

2. The battery menu item displays the status

of the main and backup batteries.

On the screen shown here, both batteries

are Good.

NOTE: It is necessary to charge the bat-

tery when the battery charge is

Low or Very Low. If the battery

does not accept a charge, contact

unitech Technical Support.

Extending Battery Life

You can extend the PA600 battery life by doing either of the following:

• Change the automatic power settings

• Minimize the use of backlight

Changing the Automatic Power Settings

The PA600 will enter idle mode when there is no task, or all tasks are waiting for input.

In default setting, the PA600 automatically turns itself off if it remains idle for 3 minutes

and when there is no external charging power connected. Pressing the power button

returns the PA600 to the same point at the time of automatic shutdown.

To change the automatic power settings:

1. In the Power screen tap the Schemes tag.

2. Tap the Switch state to User Idle,

Switch state to System Idle or Switch

state to Suspend to select from a list of

time periods. The available time periods

are 1, 2, 3, 4, 5, 10, 30 minutes and

never.

3. This function can also be activated when

the PA600 is plugged into the power

adapter or placed in its docking station by

tapping the Power Scheme to select AC

Power and then tapping the arrow to

select from a list of time periods. The

available time periods are 1, 2, 5,10, 15,

30 minutes and never.