User`s manual

10
Copyright 2009 unitech Electronics Co., Ltd. All rights reserved. unitech is a registered trademark of unitech Electronics Co., Ltd.
Connecting the PA600 to a PC
Use the USB cable to connect the PA600 to a PC, in order to use with ActiveSync.
NOTE: To avoid low battery situation while synchronizing, you should connect
the power supply.
1. Press and hold the connector button on the USB charging cable and connect it
to the PA600 (1).
2. Plug the USB connector into the USB port on the PC and connect the AC
adapter into the USB connector (2).
3. Connect the AC adapter into an electrical outlet (3).
3
2
1