User`s manual

Most settings require only a single bar code, but a few need several different bar

codes to be scanned in order to completely define a setting. They are:

Double Verification:

Step 1: Scan Double Verification from Group 5

Step 2: Scan one digit

Step 3: Scan Double Verification

Min Length / Max Length

Step 1: Scan MIN LENGTH or MAX LENGTH.

Step 2: Scan two digits from Appendix E.

Step 3: Scan MIN LENGTH or MAX LENGTH.

NOTES:

1. If you hear three times of beeps, please re-operate.

2. If you operate improperly, reset the scanner and re-scan.

Barcode Length Setting

The following example illustrates how to set Code 39 with a minimum length

of 5 and a maximum length of 20:

 Scan "Enter Group 7"

 Scan "Fl" to select Code 39

 Scan "MIN LENGTH" to enter minimum length setting

 Scan "0 " and "5" to select length 5. (Appendix E)

 Scan -MIN LENGTH" to end minimum length setting

 Scan "MAX LENGTH" to enter maximum length setting

 Scan "2" and "0" to select length 20. (Appendix E)

 Scan "MAX LENGTH" to end maximum Length Setting

 Scan "Exit" to end setup