User's Manual

Chapter 1 Getting Started

Calibrating the PA600 Screen

The calibration screen automatically appears when the PA600 powers on for the first

time or after the system is reset. Calibrate the screen at any time through the

following:

1. Tap Start → Settings → Control Panel.

2. Double-tap Stylus. The Stylus Properties win-

dow appears.

NOTE: Or, simultaneously press FUNC and

ESC.

3. Tap the Calibration tab.

4. Tap Recalibrate to calibrate the screen. The

align screen window appears.

5. Tap the target firmly and accurately.