User's Manual

Table Of Contents

and determine to select the ASUS English (US) Keyboard (ASUS Keyboard) input method.

b. To do a test, open Polaris Office and create a new Document or even a new E-mail [anything

that will allow you to type in data].

c. Scan a number bar code from this manual.

d. That number should appear on the TB100 in the application you opened.

e. If not, please scan [Disconnect] barcode below and repeat steps 1 to 9 above.

Note. To disconnect the scanner from the host or to switch the wireless profile from one to another, please scan the

[Disconnect] barcode. After scanning the [Disconnect] barcode, the MS910 will emit 3 beeps.

Disconnect

Connecting via SPP Mode

1. Turn on the TB100.

2. Press the MS910 scanner trigger for 1 second to activate.

3. Scan the [Disconnect] barcode.

Disconnect

4. Scan the [SPP] barcode below.

SPP

5. The scanner will emit several short beeps and then stop beeping. The green LED light will

flash continually during the pairing process.