User's Manual
Table Of Contents
- About This Manual
- Getting Started
- Using the Hardware
- Making RFID Applications
- Using Smart-Reader Server
- Controlling Smart-Reader Server Remotely
- Installing Microsoft .NET Framework
- Installing the SRSRC Program
- Using the Smart-Reader Server Remote Control
- Configuring Antenna Port
- Defining Smart Reader Behavior
- Creating a New EC Spec
- Specifying Report Criteria
- Setting up Filter Rules
- Defining the EC Spec
- Subscribing the EC Spec
- Redefining the Subscription
- Viewing Data Collection Report
- Viewing Server Log
- Using the Application Programming Interface
- Connecting to BizTalk Server
- Connecting to Oracle Sensor Edge Server
- Advanced Settings
- Troubleshooting
- System Specification
- Support
Chapter 4 Advanced Settings
38
Copyright 2009 Unitech Electronics Co., Ltd. All rights reserved. Unitech is a registered trademark of Unitech Electronics Co., Ltd.
Connecting to a WLAN Network
It is possible to send and receive signals to a Wi-Fi network, and synchronize files with
the RS700’s embedded WLAN interface.
NOTE: Wi-Fi access requires a separate service contract through a wireless
service provider. Contact a wireless service provider for more informa-
tion.
A wireless network can be added when the network is detected or by manually enter-
ing information settings. Determine if authentication information is needed before pro-
ceeding through the following steps.
Setup a wireless LAN via RS700 WebConfig Server through the following:
1. Click Profile Setup in the left screen panel. The Wireless Profile page appears
in the right screen panel. Click New to add a new profile.
2. Enter the profile name in the dialog box. Click Ok.