User's Manual
Table Of Contents
- About This Manual
- Getting Started
- Using the Hardware
- Making RFID Applications
- Using Smart-Reader Server
- Controlling Smart-Reader Server Remotely
- Installing Microsoft .NET Framework
- Installing the SRSRC Program
- Using the Smart-Reader Server Remote Control
- Configuring Antenna Port
- Defining Smart Reader Behavior
- Creating a New EC Spec
- Specifying Report Criteria
- Setting up Filter Rules
- Defining the EC Spec
- Subscribing the EC Spec
- Redefining the Subscription
- Viewing Data Collection Report
- Viewing Server Log
- Using the Application Programming Interface
- Connecting to BizTalk Server
- Connecting to Oracle Sensor Edge Server
- Advanced Settings
- Troubleshooting
- System Specification
- Support
Chapter 4 Advanced Settings
36
Copyright 2009 Unitech Electronics Co., Ltd. All rights reserved. Unitech is a registered trademark of Unitech Electronics Co., Ltd.
6. Refer to the MAC address label attached the RS700’s rear panel, and discover
the RS700’s IP address in the list box. Double-click the IP address to open the
configuration webpage in the default browser.
7. The RS700 WebConfig Server window appears with basic information about
the RS700, such as program version numbers and system memory.
The built-in RS700 WebConfig Server is a web-based interface, which can configure
the RS700 on a remote computer.
Setting the System Time
Synchronize the system time with the remote computer via the RS700 WebConfig
Server. Set the system time through the following: