User's Manual
Table Of Contents
- About This Manual
- Getting Started
- Using the Hardware
- Making RFID Applications
- Using Smart-Reader Server
- Controlling Smart-Reader Server Remotely
- Installing Microsoft .NET Framework
- Installing the SRSRC Program
- Using the Smart-Reader Server Remote Control
- Configuring Antenna Port
- Defining Smart Reader Behavior
- Creating a New EC Spec
- Specifying Report Criteria
- Setting up Filter Rules
- Defining the EC Spec
- Subscribing the EC Spec
- Redefining the Subscription
- Viewing Data Collection Report
- Viewing Server Log
- Using the Application Programming Interface
- Connecting to BizTalk Server
- Connecting to Oracle Sensor Edge Server
- Advanced Settings
- Troubleshooting
- System Specification
- Support
Chapter 3 Making RFID Applications
16
Copyright 2009 Unitech Electronics Co., Ltd. All rights reserved. Unitech is a registered trademark of Unitech Electronics Co., Ltd.
Creating a New EC Spec
In the All Defined EC Specs field, *specTest1 is defined and subscribed as the
default. Create a new event cycle specification through the following:
1. Click New EC Spec. An InputBox screen appears.
2. Input a unique EC Spec name or accept the default at spec1. Click OK, and
spec1 appears in the All Defined EC Specs field.
3. In the All Defined EC Specs: field, check Repeat, Period: for the automatic
reading mode, and set the following values in milliseconds.
– Repeat, Period: field - Cycle time (5000ms by default).
– Duration: field - Duration for reading data within the cycle time (4500ms by
default).