User's Manual

Table Of Contents

Chapter 3 Making RFID Applications

NOTE: Do not change the default port number from 11126, and ensure that the

port is not occupied by any other service.

3. The SRS Remote Control window appears. The SRSRC menu resides in the

left pane, while the reader status is in the right pane.

At the bottom right corner of the screen, the login info displays the user name

and the login time duration. Click Stop to end the connection between the

RS700 and the R1000 Reader.

NOTE: A dialog box appears informing User account expired! (when the

screen is idle for three minutes). Login (again) and continue with the set-

tings.

Configuring Antenna Port

To enable or disable antennas connected to antenna ports, click Device Status in the

left screen panel. Configure the Antenna Port settings through the following:

1. In the Antennas: field, check the antenna port number to enable the antenna.

Antenna port number (1 is checked by default). If more than one antenna is

enabled, the antennas switch in numerical order (i.e., 1 → 2 → 3 → 4 → 1).

2. In the Antenna Switch Time (ms): field, input the Antenna Switch Time for

each reading period (300ms by default).