Manualshelf

User's Manual

ManualsBrandsUnitech Electronics ManualsElectronicsData Collection Terminal
20212223242526272829
9
Copyright 2011 unitech Electronics Co., Ltd. All rights reserved. Unitech is a registered trademark of unitech Electronics Co., Ltd.
Connecting the RH768 to a PC
Use the Synchronization Power Cable to connect the RH768 to a PC to use Microsoft
ActiveSync.
1. Connect the USB Connector jack to the RH768 (1).
2. Plug the USB Connector into a serial port on the PC and connect the AC Adapter into the
USB Connector (2).
3. Connect the AC Adapter into an electrical outlet (3).
Turning the RH768 on for the First Time
The device is ready for use after it has been charged for at least 16 hours. Start up the device
to adjust the screen brightness, calibrate the display, and set up the system time zone, date,
and time.
Powering On
1. Turn on the device by pressing the Power Button on the front panel.
2. The Unitech RH768 welcome screen appears followed by the calibration screen.
Power Button