User's Manual

Terminal LED indicators

from left to right:

-- Bluetooth

Communication

-- Scan

-- Power

Charging the Battery with the Docking Station

1. Plug the AC Adapter cable into the Docking Station's power jack, and then connect the AC

Adapter into an electrical outlet.

2. Slide the RH768 into the Docking Station until it

clicks into place.

3. The connection is secure when the bottom edge of

the device aligns with the docking station. (The

Docking Station's LED indicator lights up green,

while the RH768's LED indicator lights up red.)

LED Status

LED

Status

Description

Bluetooth

Flashing Blue Bluetooth module is

enabled.

Solid Red Ready for Reading Scan

Solid Green Successful reading

Solid Red Being charged

Terminal

Power

Solid Green Fully charged

Solid Green Power is on

Cradle Power/Communication

Flashing Green

Data synchronization is

active.

Checking the Battery Status

If the battery level becomes low in the course of normal use, a status icon appears on the

device screen indicating low or very low battery status. In both cases, perform an ActiveSync

operation to back up your data, and then recharge your device as soon as possible.

CAUTION! Once the device is shut down, you should recharge the device within 48 hours.

Otherwise you will lose all data including files stored in the RAM memory.

Cradle Power/Communication

LED indicator