User's Manual
Table Of Contents
- PA982 Ultra Rugged Mobile Computer
- About This Manual
- Getting Started
- Introducing the PA982
- Features
- Package Contents
- A Tour of the PA982
- Setting up the PA982
- Installing the Battery
- Charging the Battery
- Charging the Battery using the RS232 Charging Cable
- Charging the Battery with the Docking Station
- Checking the Battery Status
- Connecting the PA982 to a PC
- Turning the PA982 on for the First Time
- Powering On
- Calibrating the PA982 Screen
- Setting the Time and Date
- Adjusting the Screen Brightness
- Using the Hardware
- Getting Connected
- Barcode Scanner Programs
- Advance settings
- System Specifications
27
Copyright 2006 Unitech Electronics Co., Ltd. All rights reserved. Unitech is a registered trademark of Unitech Electronics Co., Ltd.
Performing a Hardware Reset
You may have to perform a reset if the device freezes (i.e., device no longer responds
to the buttons on the screen). There are three ways to
Performing a Warm Boot
A warm boot allows your device to get a fresh start, similar to rebooting a computer.
This will restart your device and adjust memory allocation. All records and entries are
retained after a warm boot. Unsaved data in open programs may in some cases be
lost.
1. Tap Start → Programs → Utilities → Boot
Mode:
The BootMode screen opens.
2. Tap Warm Boot. The system is reset and
you will lose all unsaved data.
Alternatively, to perform a warm boot, lightly
press the tip of the stylus to the reset button
located on the rear of the PA982.