User's Manual
Table Of Contents
- PA982 Ultra Rugged Mobile Computer
- About This Manual
- Getting Started
- Introducing the PA982
- Features
- Package Contents
- A Tour of the PA982
- Setting up the PA982
- Installing the Battery
- Charging the Battery
- Charging the Battery using the RS232 Charging Cable
- Charging the Battery with the Docking Station
- Checking the Battery Status
- Connecting the PA982 to a PC
- Turning the PA982 on for the First Time
- Powering On
- Calibrating the PA982 Screen
- Setting the Time and Date
- Adjusting the Screen Brightness
- Using the Hardware
- Getting Connected
- Barcode Scanner Programs
- Advance settings
- System Specifications
Chapter 5 Advance settings
26
Adjusting Backlight Setting
The power consumption of the LCD backlight is high. To conserve battery power, turn
off the backlight function if it is not necessary.
To change backlight settings:
1. Tap Start → Settings → Control Panel.
2. Tap Backlight.
The Backlight screen appears.
3. Click the Battery Power or External
Power radio button and do any of the fol-
lowing:
– Tap the Dim backlight if device is not
used for check box and select the
amount of time before the unit reduces
the backlight intensity from the drop-
down list.
– Tap the Turn off backlight if device is
not used for check box and select the
amount of time before the unit turns off
the backlight from the drop-down list.
– Tap the Turn on the backlight key...
checkbox to activate the backlight when
the screen is tapped or a button is
pressed.
– Use the slider bars to select the intensity of the backlight when it is fully on or
dimmed.