User's Manual
Table Of Contents
- PA982 Ultra Rugged Mobile Computer
- About This Manual
- Getting Started
- Introducing the PA982
- Features
- Package Contents
- A Tour of the PA982
- Setting up the PA982
- Installing the Battery
- Charging the Battery
- Charging the Battery using the RS232 Charging Cable
- Charging the Battery with the Docking Station
- Checking the Battery Status
- Connecting the PA982 to a PC
- Turning the PA982 on for the First Time
- Powering On
- Calibrating the PA982 Screen
- Setting the Time and Date
- Adjusting the Screen Brightness
- Using the Hardware
- Getting Connected
- Barcode Scanner Programs
- Advance settings
- System Specifications
Chapter 5 Advance settings
24
Checking the Main and Backup Battery Status
This section describes how to view the power level for both the main and backup bat-
tery. To minimize power consumption, you can define settings for the auto-off function
and the processor’s operation speed.
To check the main and backup battery status:
1. Tap Start → Settings → Control Panel →
Power:
The Power Properties screen appears.
2. The battery menu item displays the status
of the main and backup batteries.
On the screen shown here, the main battery
is good, but the backup battery charge is
very low. You should replace the backup
battery as soon as possible in this case.
NOTE: It is necessary to charge the battery
when the battery charge reaches
below 10%. If the battery does not
accept a charge, contact Unitech
Technical Support.