User's Manual

Product Reference Guide

If a PCMCIA card is inserted into the PA966 without previ-

ously attaching a Pulling Tag, the card c

an be removed by

affixing a length of adhesive tape to the surface of the card

and pulling the card out by pulling outward on the piece of

tape.

PCMCIA Pulling Tags

Pulling Tags simplify the removal of PCMCIA cards from the PA966. Before

inserting a PCMCIA card, remove one of the three Pulling Tags from the

Pulling Tag sheet and adhere it to both sides of the PCMCIA card, leaving a

short (approx. ½”) tab. To remove the PCMCIA card, simply pull outwards on

this tab.

Protective Screen Film

The PA966 screen ships with a protective plastic film. You may remove this if desired by

peeling from one corner. The screen will be more susceptible to scratching without the

film, but will be more readable.

Using the Stylus

CAUTION: Never use anything other than the PA966’s stylus on the

screen. Using object other than a stylus could cause permanent

damage.

To write data into a field on a form, use the stylus to print the letters or

numbers. Use very light pressure.

To make a choice from a menu, lightly tap the tip of the stylus on that

choice.

Hold the stylus as you hold a pencil.1.

Front side of PCMCIA card

Insert CF card to PA966

Find the CF drawer from PA966 package, insert CF card to the

CF drawer. Then insert the CF drawer to the PA966 and place

the CF slot door. Re-install the battery door to PA966.

1. 3.

Your CF card

CF drawer

PCMCIA card

front side

PCMCIA card

front side